00197733-01_VD_605_04_DE_EN - 第26页
Station Software 60 5.04 / Version D escription Ausgabe 04/ 2015 Edition 26 8 SIPLACE Softw are Environment 8.1 SIPLACE Pro Pr ogramming S ystem Version 11.2 The 11.2 softwar e version of the S IPLACE Pro programmi ng sy…
Station Software 605.04 / Version Description Ausgabe 04/2015 Edition
25
Component range
for P&P head
With type 36 component
camera
(Stat. P&P 32 x 32
digital)
With type 25 component
camera
(Stat. P&P 16 x 16
digital)
With type 33 component
camera
(Stat. P&P 55 x 45 digital)
0603 through SO, PLCC,
QFP, BGA, special
components, bare die,
flip-chip
0201 through SO, PLCC,
QFP, sockets,
connectors, BGA, special
components, bare die,
flip-chip, shield
0603 through SO, PLCC,
QFP, BGA, special
components, bare die, flip-
chip
Component
specification
Max height 18.80 mm 18.80 mm 18.80 mm
Min. lead pitch r 0.4 mm 0.25 mm 0.3 mm
Min. ball pitch 0.56 mm 0.14 mm 0.35 mm
Min. ball diameter 0.32 mm 0.08 mm 0.2 mm
Min. dimensions 0.8 x 0.,8 mm 0.2 x 0.2 mm 0.5 x 0.5 mm
Max. dimensions 32 x 32 mm (single
measurement)
16 x 16 mm (single
measurement)
55 x 45 mm (single
measurement)
85 x 85 mm or 125 x 10 mm
max. 200 x 125 mm (single
measurement)
Max. weight 100 g
*)
100 g
*)
100 g
*)
Programmable
placement force
1.0 N - 15 N 1.0 N - 15 N 1.0 N - 15 N
Nozzle typ 5 xx (standard)
4 xx + adapter
8 xx + adapter
9 xx + adapter
5 xx (standard)
4 xx + adapter
8 xx + adapter
9 xx + adapter
5 xx (standard)
4 xx + adapter
8 xx + adapter
9 xx + adapter
Table 7-7: Component range for P&P head
*)
If standard nozzles are used
Station Software 605.04 / Version Description Ausgabe 04/2015 Edition
26
8 SIPLACE Software Environment
8.1 SIPLACE Pro Programming System Version 11.2
The 11.2 software version of the SIPLACE Pro programming system supports SIPLACE machines
with station software version 605.
NOTICE
For a detailed description of the programming system, see the SIPLACE Pro version
description and the online help.
8.2 SIPLACE Operator Information System OIS Version 11.2
The 11.2 software version of the SIPLACE OIS monitoring system supports all machine types of
the X- and D-series.
NOTICE
A detailed description can be found in "Getting started with OIS" and the online help for
OIS.
8.3 SIPLACE Setup Center Version 6.3
The 6.3 software version of SIPLACE Setup Center supports all machine types of the X- and
D-series.
NOTICE
A detailed description can be found in the software description "Getting started with
Setup Center" and the online help for Setup Center.
8.4 SIPLACE Traceability Version 3.6 SP1
The 3.6 SP1 software version of SIPLACE Traceability supports all machine types of the X- and
D-series.
NOTICE
A detailed description can be found in the “Traceability User Guide".
Station Software 605.04 / Version Description Ausgabe 04/2015 Edition
27
9 Restrictions
SIPLACE CA-series
The SIPLACE CA-series placement machines (SIPLACE CA3 and SIPLACE CA4) are not
supported by this station software version.
NOTICE
The SIPLACE X-series placement machines are still supported by this station software
version, but the support will be discontinued in future versions.
C&P20 head
– Can only be used in conjunction with X-feeders.
– Can only be used in conjunction with a second C&P20 head in placement areas with 2
gantries.
X-Feeders
– Are only available for tapes between 8 mm and 88 mm and can only be set up on X-series
component changeover tables.
X-Feeder adapters
– X-feeder adapters can only be used on component changeover tables of the X-series.
– The station software does not check the compatibility of the X feeder adapter with the current
head configuration. This check is carried out by SIPLACE Pro or by the operator.
– Splice sensors are not supported by the X-feeder adapter.
Bulk case feeders and surf tape feeders
– Cannot be set up on X-tables of the X-series and are thus not available for the C&P20 head.
Dip modules
– Cannot be set up on X-tables of the X-series and are thus not available for the C&P20 head.
FFI feeders
– Cannot be set up on X-tables of the X-series.
2D barcode reader
– The barcode for components cannot exceed 50 characters.