00197733-01_VD_605_04_DE_EN - 第34页
Station Software 60 5.04 / Version D escription Ausgabe 04/ 2015 Edition 34 11 Appendix: Va lidity of the S ettable Mac hine O ptions The individual machine options can b e set in the Options – Machi ne option menu. You …
Station Software 605.04 / Version Description Ausgabe 04/2015 Edition
33
D16877-14914
D16877-17001
D17257-10607
D17307-5401
D17307-5501
D17349-11234
D17382-10807
D16834-7107
The software hung up during placement, especially when components were
omitted.
D17241-11201 On a D4 machine, the gantry reference run and the nozzle scan failed (problem
with component sensor).
D17310-5307 The software hung up after downloading the program.
D17310-5516 When the RV/Z axis: axis does not reach required position error
was reported there was no information about the affected segment.
D17349-8516 The station software GUI closed during production.
D17450-2811
D17522-3313
The machine stopped during placement.
D17667-2941 The machine hung up after the processed board was aborted and had to be
restarted.
D17807-2463 On a D1i placement machine, an MC exception error occurred and the machine
had to be restarted.
Table 10-1: Corrected errors
Station Software 605.04 / Version Description Ausgabe 04/2015 Edition
34
11 Appendix: Validity of the Settable Machine Options
The individual machine options can be set in the Options – Machine option menu. You require
the access level "Line engineer" or "Service engineer" to change the machine options.
A detailed description of the machine options can be found in the online help system of the station
software.
Machine option Validity
Process PCB conv. 1/2 These settings are automatically
activated for every new job.
Ink spot check
PCB position recognition
Feeder position recogn. These settings are also valid after job
changes and after the machine has
been switched off.
Comp. verification with barcode
Confirm PCB following emerg. stop
Confirm PCB when inspection is required
MTC or WPC x: FIFO component pickup strategy
S feeder: No pitch download
Error inspection in processing area
Prepick active
PCB data transfer These settings are provided via
SIPLACE Pro for every new job.
Optical component centering 1
Component sensor on head x
Without 3D senso
Input conveyor locked This setting is also valid at a machine
reboot.
Table 11-1: Validity of machine options
Station Software 605.04 / Version Description Ausgabe 04/2015 Edition
35
12 Important Terms and Abbreviations
ACT Accuracy Check Tool (fine calibration)
C&P Collect & Place
CS Component Shape
D1 / D1i D-series machine type with 1 gantry
D2 / D2i D-series machine type with 2 gantries
D3 D-series machine type with 3 gantries
D4 / D4i D-series machine type with 4 gantries
DIPF Device Independent Package Form
eSW Embedded Software
FCCS Field Camera Calibration Service
FFI Flexible Feeder Interface
GUI Graphical User Interface
HFTH High Force Twin Head
MTC Matrix Tray Changer
OIS Operator Information System
P&P Pick & Place
PA Processing area
PCB Printed circuit board
RP Recovery placement
RR RoadRunner (feeder unit with programming system)
SC Station computer
SMV SIPLACE Mobile Verifier
SPL SIPLACE Productivity Lift
SSC SIPLACE Setup Center (external setup station)
TH Twin Head
VCU Vision Control Unit
WDTL Whispering down the line
WDTM Whispering down the machine
WPC 4 Waffle pack changer for D-series machines
WTS Wafer Transfer System