00197042-04_SM_X-Serie-S_Customer_EN - 第161页

6 Gantries 6.4 Trailing cable and printed circuit boards Service Manual SIPLACE X-Serie S 06/2019 161 Overview Fig.198: Overview of trailing cable (in example "up to Gxxxx", without GigE) 1. Boards on the gant…

100%1 / 428
6 Gantries
6.4 Trailing cable and printed circuit boards
160 Service Manual SIPLACE X-Serie S 06/2019
6.4 Trailing cable and printed circuit boards
6.4.1 Replacing the Trailing Cable
NOTICE
Example shown as diagram
Replacement of the trailing cable is described using the example of gantry 3. The replace-
ment procedure is the same for the other gantries.
Select the applicable trailing cable:
Machines with serial number up to and including Gxxxx
Machine type
Gantry
Trailing cable Y SIPLACE Trailing cable X SIPLACE
X3 S 1 SX4a vario 2P U [03103485-xx] SX4a vario 2P [03103478-xx]
4 SX4a vario 2P G [03103546-xx] SX4a vario 2P [03103478-xx]
3 SX3a vario [03103558-xx] SX4a vario 2P [03103478-xx]
X4 S 1+3 SX4a vario 2P U [03103485-xx] SX4a vario 2P [03103478-xx]
2+4 SX4a vario 2P G [03103546-xx] SX4a vario 2P [03103478-xx]
X4i S 1+3 SX4a vario 2P U [03103485-xx] SX4a vario 2P [03103478-xx]
2+4 SX4a speed 2P G [03103351-xx] SX4a speed 2P G [03103359-xx]
Machines with serial numbers from Hxxxx
Machine type
Gantry
Trailing cable Y SIPLACE Trailing cable X SIPLACE
X3 S 1 X4S GigE 2P U [03104774-xx] X4S GigE 2P U [03104776-xx]
4 X4S GigE 2P G [03104780-xx] X4S GigE 2P U [03104776-xx]
3 X3S GigE [03104777-xx] X4S GigE 2P U [03104776-xx]
X4 S 1+3 X4S GigE 2P U [03104774-xx] X4S GigE 2P U [03104776-xx]
4+2 X4S GigE 2P G [03104780-xx] X4S GigE 2P U [03104776-xx]
X4i S 1+3 X4S GigE 2P U [03104774-xx] X4S GigE 2P U [03104776-xx]
4+2 X4iS GigE 2P G [03104773-xx] X4iS GigE 2P G [03104768-xx]
6 Gantries
6.4 Trailing cable and printed circuit boards
Service Manual SIPLACE X-Serie S 06/2019 161
Overview
Fig.198: Overview of trailing cable (in example "up to
Gxxxx", without GigE)
1. Boards on the gantry (shown without
board cover here)
2. Trailing cable console
3. Power track chain
4. Trailing interface gantry
5. Pneumatic hoses to the pneumatic dis-
tributor (in the machine base)
6. Gantry interface
7. Connection piece for cooling tubes to Y
motor
8. Vision Hotlink Adapter VHA
[03050555‑xx]
9. Pneumatic distributor
Fig.199: Boards on the gantry (up to Gxxxx, without
GigE)
Fig.200: Boards on the gantry (from Hxxxx, with GigE)
1 Vision board spread spectrum / Vision
Head Interface (VHI)
2 Head interface
3 Power cube on the head interface
6 Gantries
6.4 Trailing cable and printed circuit boards
162 Service Manual SIPLACE X-Serie S 06/2019
6.4.1.1 Handling the hose unlocking tool
Equipment and tools
Fig.201: Unlocking tool
●
Tool set vacuum connection X-Series
(unlocking tool) [03051867‑xx]
Consists of:
– Hose unlocking tool [03047090-xx]
– Unlocking tool for QSC-10H
[03051853-xx]
Usage
► Switch off the compressed air supply
5.2 "Disabling the compressed air supply" [}134]
Due to the poor access to the pneumatic distributor, we recommend using the unlocking tool.
With the help of the hose unlocking tool, you can open the unlocking ring for the compressed air
connection. This enables you to remove both the hoses and the blanking plugs (additional tool "Un-
locking tool for QSC-10H" [03051853-xx]).
Fig.202: Handling the unlocking tool
► Use the pipe-shaped tool (1) to open
the unlocking ring (blue here).
► Carefully pull the hose or the blanking
plug(2) out of the compressed air con-
nection.