00197042-04_SM_X-Serie-S_Customer_EN - 第23页

1 Introduction 1.3 Other instructions Service Manual SIPLACE X-Serie S 06/2019 23 Release Amendments 06/2019 Amendments, corrections and supplements: ● Supplement to the micron machines ● Safety instructions (updated, so…

1 Introduction

1.3 Other instructions

22 Service Manual SIPLACE X-Serie S 06/2019

1.3.6 Release History

Release Amendments

07/2013 Initial release

01/2014 Amendments, corrections and supplements:

●

Supplements for X4i S micron, X4 S micron

●

Basic machine: checking screwed connections on the gas pressure shock

absorbers, setting the machine covers, guide rollers

●

Electrics and control: voltage pulsed power pack A8, CAN switch

●

Pneumatics: main switch, motor protection switch, motor protection trip

block, sealing screwed connections

●

Gantry: trailing cable, PCB camera, pressure sensor

●

Conveyor: moving conveyor sides, clamping units, idler pulleys, laser light

barrier transmitter/receiver, conveyor widths SC

●

Placement heads: supplements for C&P20 P

●

Nozzle changers: new nozzle changer, switching unit

●

Changeover table: actuator

●

Docking station: FCU

●

SPS: round cable

07/2015 Amendments, corrections and supplements:

●

X module upgrade

●

Basic machine: setting the covers

●

Electrics: absence of voltage, SMPS power supply, motor protection switch,

shunt opening release, indicator lamp

●

Controls: CAN interface, GigE Ethernet adapter, LAN card, I/O control unit,

BoxPC, hotlink interface card

●

Pneumatics: proportional controller

●

Gantry: MGCU, Vision Base Interface, Vision Head Interface, trailing cable,

guide trolley, X and Y motor, head plate sensors, pressure sensor, head in-

terface

●

Conveyor: clamping units

●

Placement heads: C&P20 P, stationary cameras

●

Nozzle changer: nozzle changer, valve n/a, switching unit n/a

●

Measurement tools

●

COT insert: reject bin sensors, FCU

●

Tape cutter: setting times, baffle plate

●

Docking station: power pack

●

Board descriptions: Vision Base Interface, Vision Head Interface, SPS con-

trol board, I/O control unit, head interface, X basic adapter Twin, FCU

1 Introduction

1.3 Other instructions

Service Manual SIPLACE X-Serie S 06/2019 23

Release Amendments

06/2019 Amendments, corrections and supplements:

●

Supplement to the micron machines

●

Safety instructions (updated, socket, new lockout)

●

Cameras (troubleshooting and cleaning)

●

Basic machine:

guide rollers on the covers (new item no.)

nozzle changer (new version)

●

Power supply:

distributors (DIP switch)

Absence of voltage (revised)

Contactor safety breaker (revised)

distributor and fuse board (revised)

●

Electrics and control:

BoxPC and working memory (revised)

cover switch (revised)

indicator lamp (new version supplemented)

pushbutton (new section)

●

Pneumatics:

locking compressed air inlet (revised)

setting pressure for machine components (revised)

pressure regulator (revised)

pneumatics assy (revised)

proportional controller (revised, new version)

●

Gantry:

incremental encoder (new version, testing devices)

Vision Head Interface (troubleshooting)

head interface (GigE)

pressure sensor (revised)

●

Conveyor:

moving the conveyor side walls(revised)

adjusting the conveyor side walls (revised)

lifting table plate (revised)

calibrating the motor (revised)

toothed belt for conveyor (revised)

laser light barrier (new version)

fiber optic cable sensors (revised)

●

Head exchange:

new heads for Micron

Fast Hardware Exchange (revised)

SIPLACE CPP (GigE supplemented)

hose lengths (supplemented)

●

Tape cutter (fully revised)

●

COT insert (new FCU)

●

Component trolley (bearing assy, actuator/protective bracket)

●

SPS (screw locking varnish)

●

Complete revision of document structure, various editorial amendments

1 Introduction

1.4 Staff qualifications and training

24 Service Manual SIPLACE X-Serie S 06/2019

1.3.7 SIPLACE on the World Wide Web (WWW)

You can choose between the German and English version.

The different sections contain information about our products, services and contact persons.

In addition, registered customers can also access the MySIPLACE user group. Here you can call

up special information about our placement systems, e.g.

●

technical documentation

●

technical information

●

spare parts lists etc.

Registration for the MySIPLACE user group is very simple:

► At the head of the web site, click on

and then on the Register

link.

► Fill in the registration form and send it off to us.

Soon afterwards, you will receive your access authorization with user name and password.

1.4 Staff qualifications and training

Qualified or adequately trained personnel means that these people are familiar with the setting up,

operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:

●

Have been trained, instructed or authorized to switch on and off, isolate, earth and identify

electrical circuits and system components in accordance with normal safety standards.

●

Have been trained or instructed in the upkeep and use of appropriate safety equipment in

accordance with normal safety standards.

●

Have received first aid training.

1.5 Abbreviations

Abbreviations Description

PA, PA1, PA2 Placement area, Placement area 1, Placement area 2

CO Component

COT Changeover table

COT-i Changeover table insert

C&P Collect&Place

CPP Collect&Pick&Place

DC Dual conveyor with 2 lanes

ESD Electrostatic sensitive device

EMC Electromagnetic compatibility

SC Single conveyor with 1 lane

FHE Fast Hardware Exchange

PCB PCB board

P&P Pick&Place

SCS Single Core Solution

SC Station computer

TH TwinHead

WPC Wafflepack changer

ID Intermediate distributor