00197042-04_SM_X-Serie-S_Customer_EN - 第3页
3 Service Manual SIPLACE X-Serie S 06/2019 Contents: Contents: 1 Introduction .. 11 1.1 Safety instructions .. 11 1.1.1 Conventions for the use of safety instructions and symbols .. 11 1.1.2 Safety instructions for…
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate
the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00197042-04
www.asm-smt.com Printed by ASM Assembly Systems
3Service Manual SIPLACE X-Serie S 06/2019
Contents:
Contents:
1 Introduction.. 11
1.1 Safety instructions.. 11
1.1.1 Conventions for the use of safety instructions and symbols.. 11
1.1.2 Safety instructions for working with strong magnetic fields.. 12
1.1.3 Safety instructions for the power supply (without SMPS).. 12
1.1.4 Safety instructions for the power supply (with SMPS).. 13
1.1.5 Safety instructions for the compressed air supply.. 15
1.1.6 Safety instructions for work on the cutting device.. 15
1.1.7 Safety instructions for the gantry.. 15
1.1.8 Safety instructions on hazardous materials.. 15
1.1.9 Classification of the optical systems.. 16
1.1.9.1 Classification of the whole machine.. 16
1.1.9.2 Laser classification.. 16
1.1.9.3 Classification of the camera systems.. 16
1.2 Preparatory work..... 16
1.3 Other instructions.. 19
1.3.1 Environmentally-friendly disposal of materials and components.. 19
1.3.2 Use of original accessories and spare parts.. 19
1.3.3 Information about this service manual.. 20
1.3.4 ESD guidelines.. 20
1.3.4.1 What does ESD mean?.. 20
1.3.4.2 Important measures to protect against static charging.. 20
1.3.4.3 Handling ESD modules.. 20
1.3.4.4 Measurements and modifications to ESD modules.. 21
1.3.4.5 Dispatching ESD modules.. 21
1.3.5 Validity of Document.. 21
1.3.6 Release History.. 22
1.3.7 SIPLACE on the World Wide Web (WWW).. 24
1.4 Staff qualifications and training.. 24
1.5 Abbreviations.. 24
2 Basic Machine.. 25
2.1 Overview of X-Series S Machines.. 25
2.1.1 Serial Number of Module.. 25
2.2 Replacing the gas pressure shock absorber on the cover.. 26
2.2.1 Troubleshooting – Loose Screwed Fixtures on the Gas Pressure Shock Absorbers.. 28
2.3 Guide Rollers on the Covers.. 29
2.4 Setting the Covers.. 31
2.4.1 Overview.. 31
2.4.2 Setting the Cover Switch.. 31
2.4.3 Setting the Cover Switch Centering Device.. 32
2.4.4 Setting the Actuator.. 32
2.4.5 Setting the Bottom Stop.. 33
2.4.6 Setting the Cover Rollers.. 34
2.5 Replacing the barcode laminate for the X feeder.. 35
2.6 Replacing the machine foot.. 36
2.7 Replacing Stationary Component Camera Digital Type 25/33/36.. 37
2.7.1 Installation Height of the Stationary Camera.. 38
4 Service Manual SIPLACE X-Serie S 06/2019
Contents:
2.7.2 Troubleshooting Stationary Cameras.. 39
2.7.3 PCBs Stationary Cameras.. 40
2.7.3.1 Vision LED driver VLT 33.. 40
2.7.3.2 Vision LED Controller VLC25/33 GigE DTC.. 40
2.7.4 DIP Switch for Camera Types 25 and 33.. 42
2.8 Nozzle Changers and Reject Boxes.. 43
2.8.1 Nozzle Changers and Nozzle Stations - Overview.. 43
2.8.2 Replacing the Nozzle Changer.. 44
2.8.3 Setting the Nozzle Reject and Station Height.. 46
2.8.4 Setting the Nozzle Changer Height.. 47
2.8.5 Jumpers on the Nozzle Changer.. 48
3 Power supply.. 49
3.1 Electrical System.. 49
3.2 Electrical Checks.. 49
3.3 Pulling out the Power Supply.. 51
3.4 Power supply and transformer module (up to serial number Gxxx).. 52
3.4.1 Overview.. 52
3.4.2 Overview of Distributor and I/O Module.. 53
3.4.3 Checking the Input Voltage on the Transformer Module.. 55
3.4.4 Checking the Input Voltage at the Inrush Current Limitation Board.. 56
3.4.5 Replacing the inrush current limiter for the transformer (A2).. 57
3.4.6 Replacing the inrush current limitation for the servo (A3).. 58
3.4.7 Inrush current limiter servo (A1).. 59
3.4.8 Replacing the AC/DC Converter (A5 to A8).. 59
3.4.8.1 Setting the Voltage on the AC/DC Converters.. 61
3.4.9 Replacing the Rectifiers (U1 to U3, U20 to U24).. 62
3.4.10 Replacing the load add circuit (A4).. 63
3.4.11 Replacing the line filter (Z1).. 64
3.4.12 Replacing the protective contactor combination.. 65
3.4.13 Replacing the output coupling link (K7).. 66
3.4.14 Replacing the socket.. 67
3.4.15 Replacing the SP splitter (A10).. 68
3.4.15.1 SP distributor assembly (power supply).. 69
3.4.16 Replacing the microfuse (F40 to F51).. 70
3.4.17 Replacing the main switch 3LD2.. 71
3.4.18 Replacing the Motor Circuit Breaker with Motor Protection Tripping Unit.. 72
3.4.19 Replacing the motor protection switch PKZ2.. 73
3.4.20 Replacing the Motor Protection Release Block (PKZ2).. 75
3.4.21 Replacing the motor protection switch PKE32/XTU-32.. 78
3.4.21.1 Adjustment of the Motor Protection Switch PKE32.. 82
3.4.22 Replacing the machine mains power connection cable.. 83
3.5 Power supply and transformer module (from serial number Hxxxx).. 83
3.5.1 Overview.. 83
3.5.2 Overview of Distributor and I/O Module.. 84
3.5.3 Electrical and Control Settings.. 85
3.5.4 Checking For Absence of Voltage.. 86
3.5.5 Replacing the buffer module.. 91
3.5.6 Replacing the Contactor Safety Breaker [03112066-xx].. 93
3.5.7 Replacing the AC/DC Converter.. 95
3.5.8 Setting the Voltage on the AC/DC Converters.. 96
3.5.9 Replacing the main switch.. 97