00197042-04_SM_X-Serie-S_Customer_EN - 第395页

9 Component feeding 9.5 Manual Table and JEDEC Tray Feeder Service Manual SIPLACE X-Serie S 06/2019 395 9.5 Manual Table and JEDEC Tray Feeder NOTICE See the assembly instructions For more information about the manual ta…

9 Component feeding

9.4 Docking Station for Component Trolley

394 Service Manual SIPLACE X-Serie S 06/2019

9.4.11 Replacing the control valve

Parts

Fig.536: Control valve

03003489-xx Control valve

Equipment and tools

00353832-xx Allen key set

Wire cutters

Cable ties

Removal / installation

Fig.537: Removing the control valve

 DANGER!

Switch off the voltage supply

Press the ON/OFF button to switch off

and then unplug the power supply.

Switch off the compressed air supply.

► Disconnect the electrical and pneu-

matic connections to the control

valve(1).

► Remove the screws fastening the con-

trol valve and then remove the control

valve.

► Install the new control valve.

► Reconnect to the electrical and com-

pressed air systems.

9 Component feeding

9.5 Manual Table and JEDEC Tray Feeder

Service Manual SIPLACE X-Serie S 06/2019 395

9.5 Manual Table and JEDEC Tray Feeder

NOTICE

See the assembly instructions

For more information about the manual table and the JEDEC tray feeder, read the following

documents:

► Assembly instructions JEDEC Tray Feeder – X-Series S [00197446-xx]

► User manual JEDEC Tray Feeder [00197446-xx]

9.5.1 Manual table

Fig.538: Manual table

1. Fixture bar

2. FCU

3. Guide profiles on the front section

4. Fixture bar

5. Guide profiles on the back section

6. Fiducial feeder

7. Pneumatics

8. Feeder infeed

9. Location for the JTF

9 Component feeding

9.5 Manual Table and JEDEC Tray Feeder

396 Service Manual SIPLACE X-Serie S 06/2019

9.5.2 SIPLACE JTF-S

Fig.539: SIPLACE JTF-S – front

SIPLACE JTF-S [166670]:

1. Tray clamp

2. Toothed belt

3. Return tray pusher

4. Feeder control (behind cover)

Fig.540: SIPLACE JTF-S – back

1. Manual operation / Manual panel

2. Loading direction for empty JEDEC

trays

3. Tray pick position

4. Feeder control (back)

5. Tray switch thick/thin

6. Tray lift