00197042-04_SM_X-Serie-S_Customer_EN - 第417页
9 Component feeding 9.6 Smart Pin Support Service Manual SIPLACE X-Serie S 06/2019 417 9.6.16 Replacing the solenoid valve cable Parts, equipment and tools ● Cable SPS valve [03088170-xx] ● Assembly instructions "Sm…
9 Component feeding
9.6 Smart Pin Support
416 Service Manual SIPLACE X-Serie S 06/2019
9.6.15 Replacing the solenoid valve
Parts, equipment and tools
●
3/2 way solenoid valve V114A [03085498-xx]
●
Assembly instructions "Smart Pin Support" for SIPLACE X‑SeriesS [DEEN:00197394‑xx]
Overview
Fig.572: Solenoid valves and control board
1. Solenoid valves
2. Control board
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the pin picker. For more information, read section 9.6.1 "Replacing the Pin Picker
Assembly" [}399].
► Unplug the electrical connection from the solenoid valve.
► Undo the screws fastening the top of the solenoid valve and remove the solenoid valve.
Installation
► Follow the removal instructions in reverse order for installation.
9 Component feeding
9.6 Smart Pin Support
Service Manual SIPLACE X-Serie S 06/2019 417
9.6.16 Replacing the solenoid valve cable
Parts, equipment and tools
●
Cable SPS valve [03088170-xx]
●
Assembly instructions "Smart Pin Support" for SIPLACE X‑SeriesS [DEEN:00197394‑xx]
Overview
Fig.573: Solenoid valves and control board
1. Solenoid valves
2. Control board
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the pin picker. For more information, read section 9.6.1 "Replacing the Pin Picker
Assembly" [}399].
► Unplug the cable from the solenoid valves. You may want to mark the positions to make clear
assignment easier later on.
► Unthread the cable as far as the control board. Open the corresponding cable ties to help you,
if needed.
► Unplug the cable from the control board. You may want to mark the position, to make clear
assignment easier later on.
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following
instructions:
– Replace any opened cable ties.
9 Component feeding
9.6 Smart Pin Support
418 Service Manual SIPLACE X-Serie S 06/2019
9.6.17 Replacing the press roller
Parts, equipment and tools
●
Press roller SPS [03092384Sxx]
●
Circlip pliers size 0 (supplier: http://www.hoffmann-tools.com – item no.:719770 J0)
●
Assembly instructions "Smart Pin Support" for SIPLACE X‑SeriesS [DEEN:00197394‑xx]
Overview
Fig.574: Press roller
1. Circlip
2. Press roller
3. Press roller mount
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Remove the pin picker. For more information, read section 9.6.1 "Replacing the Pin Picker
Assembly" [}399].
Fig.575: Screws fastening the press roller mount
► Remove the two screws(1) fastening
the press roller mount.
► Loosen the circlip on the press roller.
► Remove the press roller.
Installation
► Follow the removal instructions in reverse order for installation.