00197042-04_SM_X-Serie-S_Customer_EN - 第425页
10 Vacuum Pump 10.6 Replacing the circuit breaker in the connector box Service Manual SIPLACE X-Serie S 06/2019 425 10.6 Replacing the circuit breaker in the connector box Parts, equipment and tools ● Circuit breaker 5SY…
10 Vacuum Pump
10.5 Replacing the suppressor module in the connector unit box
424 Service Manual SIPLACE X-Serie S 06/2019
10.5 Replacing the suppressor module in the connector unit
box
Parts, equipment and tools
●
EMC suppressor module RC 3x400V 575VAC 4kW [03097216-xx]
Overview
Fig.582: Suppression module
Suppression module
Fig.583: Connector unit box
1. Installation point of suppression module
2. The suppression module is connected
to terminal 2, 4 and 6.
Removal
The suppressor module is fitted in the connector unit box. The connector unit box is located at the
bottom of the machine frame, at location 2.
► For more information, read section 10.3 "Replacing the connector unit box" [}422].
Installation
► Observe the following instructions during installation:
– Cut off the cable lugs and remove approx. 1 cm of insulation from the end of the cable.
– Unlock the terminals (e.g. with a screwdriver) and insert one cable each into terminals 2, 4
and6.
10 Vacuum Pump
10.6 Replacing the circuit breaker in the connector box
Service Manual SIPLACE X-Serie S 06/2019 425
10.6 Replacing the circuit breaker in the connector box
Parts, equipment and tools
●
Circuit breaker 5SY6 3pol 6A C [03079445-xx]
Removal/Installation
The circuit breaker is located in the connector unit box. The connector unit box is located at the
bottom of the machine frame, at location 2.
► For more information, read section 10.3 "Replacing the connector unit box" [}422].
10.7 Replacing the button in the connector unit box
Parts, equipment and tools
●
Button 5TE4 800 [03072025-xx]
Removal/Installation
The button is located in the connector unit box. The connector unit box is located at the bottom of
the machine frame, at location 2.
► For more information, read section 10.3 "Replacing the connector unit box" [}422].
10.8 Replacing the relay terminal block in the connector unit
box
Parts, equipment and tools
●
Relay terminal block DEK-REL-G24/21 24VDC 1 Wech [03086538-xx]
Removal/Installation
The relay terminal block is located in the connector unit box. The connector unit box is located at
the bottom of the machine frame, at location 2.
► For more information, read section 10.3 "Replacing the connector unit box" [}422].
10.9 Replacing the diode terminal block in the connector unit
box
Parts, equipment and tools
●
Diode terminal block 2.5qmm gray 4L with 1N4007 [03006763-xx]
Removal/Installation
The diode terminal block is located in the connector unit box. The connector unit box is located at
the bottom of the machine frame, at location 2.
► For more information, read section 10.3 "Replacing the connector unit box" [}422].
10 Vacuum Pump
10.9 Replacing the diode terminal block in the connector unit box
426 Service Manual SIPLACE X-Serie S 06/2019