00197042-04_SM_X-Serie-S_Customer_EN - 第44页

2 Basic Machine 2.8 Nozzle Changers and Reject Boxes 44 Service Manual SIPLACE X-Serie S 06/2019 Fig.36: Magazine 40xx [03101503-xx] Magazine for nozzles of 40 xx/60 xx series Fig.37: Nozzle changer TwinStar (short) [0…

100%1 / 428
2 Basic Machine
2.8 Nozzle Changers and Reject Boxes
Service Manual SIPLACE X-Serie S 06/2019 43
2.8 Nozzle Changers and Reject Boxes
See also
2 9.2 "COT insert" [}355]
2.8.1 Nozzle Changers and Nozzle Stations - Overview
Fig.31: Nozzle changer short [03103649‑xx]
Standard nozzle changer, short
[03103649‑xx] for four magazines
Fig.32: Nozzle changer, long [03147324‑xx]
Standard nozzle changer, long
[03147324‑xx] for six magazines
Fig.33: Nozzle changer, long
Nozzle changer, long
for SIPLACE C&P20 [03070123‑xx]
for SIPLACE C&P20M [03147324‑xx]
with six magazines [00119715‑xx]
Fig.34: Magazine 20xx [03066107-xx]
Magazine for nozzles of 20 xx series
Fig.35: Magazine 28xx [03065782-xx]
Magazine for nozzles of 28 xx series
2 Basic Machine
2.8 Nozzle Changers and Reject Boxes
44 Service Manual SIPLACE X-Serie S 06/2019
Fig.36: Magazine 40xx [03101503-xx]
Magazine for nozzles of 40 xx/60 xx series
Fig.37: Nozzle changer TwinStar (short) [03062452‑xx]
1. Nozzle changer TwinStar (short)
[03062452‑xx]
2. Magazine for 1 nozzle [03001807-xx]
3. Magazine for 2 nozzles [03005191-xx]
4. Nozzle changer in standard configura-
tion
1x magazine for 1 nozzle
3x magazine for 2 nozzles
2.8.2 Replacing the Nozzle Changer
NOTICE
Row two, MTC2, WPC
For more information about the row 2 nozzle changers and in combination with MTC2/
WPC, refer to the assembly instructions "NC row 2 - NC before MTC 2/
WPC" [DEEN:00197369‑xx].
Parts, equipment and tools
Select the relevant nozzle changers:
●
NC basic structure CPx/all assembly long [03147324–xx] (replaces [03103514‑xx]
[03070123‑xx])
●
NC CPx/all short [03147925‑xx] (replaces [03103649-xx] [03062463-xx])
●
Nozzle changer CPP X-Series [00119741-xx]
●
Nozzle changer C&P20 SX4/DX4 [00519851-xx]
●
Nozzle changer C&P20 SX1/SX2 [00519715-xx]
●
Nozzle changer Twin [03062452‑xx]
●
If required, NC shim plates [03021079-xx]
●
Depth measuring gauge (300mm) [03079617-xx]
●
Plastic plate
Overview
Fig.38: Nozzle changer with four 4xxx magazines
1. Four nozzle magazines
2. Four fastening screws
3. Four levers for removal of nozzle
magazines
4. Cover on the underside
The electronic and pneumatic compon-
ents are under the cover.
2 Basic Machine
2.8 Nozzle Changers and Reject Boxes
Service Manual SIPLACE X-Serie S 06/2019 45
Fig.39: Overview of nozzle changers
1. Cover (covering complete electronic
and pneumatic systems)
2. Compressed air connection
3. Four fastening screws
4. Valve
Removal
► Switch off the machine, disconnect it from the power supply and secure it to prevent
unauthorized reactivation.
1.2 "Preparatory work..." [}16]
► Switch off the compressed air supply
5.2 "Disabling the compressed air supply" [}134]
► Remove all magazines.
► Remove the four fastening screws.
► Unplug the nozzles changer from all electrical and pneumatic connections. You might like to
mark their positions to make clear assignment easier later on.
► Take care not to lose the support plates. Remember their exact positions, as they will need to
be returned to these original positions, during assembly.
► Carefully lift the nozzle changer out of the machine.
Installation
► Follow the removal instructions in reverse order for installation. Also observe the following
instructions:
●
If present: Check the switch on the nozzle changer (see 2.8.5 "Jumpers on the Nozzle
Changer" [}48]).
●
Re-insert the support plates. Check the mechanical installation height of the nozzle changer
(see 2.8.4 "Setting the Nozzle Changer Height" [}47]).