00198368-01_UM_SIPLACESX12-DockingStation_DE_EN_ZH - 第44页
All names identified by ® are registered trad emarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this pub lication may be trademarks whose use by third parties for their own purposes could viol…
www.asm-smt.com
SIPLACE SX
Docking station for component trolleys
Edition 02/2018 EN
User manual
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be
precluded entirely, we cannot guarantee full consistency.
However, the information given in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
This is the original user manual.
Copyright © ASM Assembly Systems Technical data subject to change
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich
Germany
www.asm-smt.com
Item no.:00198368-01
Printed by ASM Assembly Systems
User manual Docking station for SIPLACE SX component trolleys 1 Introduction
Edition 02/2018 1.1 Overview
45
1 Introduction
This user manual is a guide or reference work for operating and setting up the SIPLACE
®
docking
station for SIPLACE SX1/SX2 component trolleys.
1.1 Overview
The docking station is an additional unit for the pre-setup area and serves as a link between the
pre-setup area and the SIPLACE SX/SX2 component trolleys. It allows the component trolleys to
be set up externally with feeder modules, function tests and setup verification.
1
Fig. 1.1 - 1 Docking station for SIPLACE SX
1
(1) Docking station (5) Sensor for component trolley detection
(2) COT insert for SX1/SX2 (6) Controls
(3) Sliding rails for guiding and docking the
changeover table
(7) EDIF (energy and data interface)
(4) Pneumatic cylinder for locking the compo-
nent trolley
(8) Height-adjustable feet for fixture to the un-
derlying surface.
1
5
3
2
4
7
8
6