00198368-01_UM_SIPLACESX12-DockingStation_DE_EN_ZH - 第51页
User manual Docking station for SIPLACE SX component trolleys 1 Introduction Edition 02/2018 1.3 Important notes on the user manual 51 1.3.2 Danger notes 1 1.3.3 Manufacturer's/supplier's liability We her eby c…
1 Introduction User manual Docking station for SIPLACE SX component trolleys
1.3 Important notes on the user manual Edition 02/2018
50
1.2.4 Important information about environmentally-friendly disposal
SIPLACE machines are preferably manufactured using materials and parts that can be easily sep-
arated and disposed of in an environmentally-friendly way.
1
1.2.5 Electromagnetic compatibility (EMC)
The docking stations are designed and tested for professional use in industrial applications. Elec-
tromagnetic compatibility in terms of the emission of interference cannot be guaranteed in any
other environment.
1.2.6 Note on original SIPLACE accessories
1
1.3 Important notes on the user manual
1.3.1 Contents and filing of the user manual
This user manual contains basic information that must be observed during set up, operation and
maintenance. The service engineers, qualified staff, operators and users plus system owner must
therefore read it before commencing installation and commissioning. The instructions must be
kept permanently accessible where the machine is used.
In addition, the user must ensure that the employees have fully understood the contents of the
user manual.
PLEASE NOTE
Correct and environmentally-friendly disposal by the operator
The owner of the system has sole responsibility for the proper environmentally-friendly
disposal of machines, working materials, consumables and wear parts.
Please observe your national statutory provisions for waste disposal and environ-
mental protection.
PLEASE NOTE
Use of original spare parts and authorized accessories
The use of other parts will affect safety and will invalidate the liability for any consequen-
tial damage.
Only use original spare parts and authorized accessories from ASM Assembly Sys-
tems GmbH&Co.KG.
User manual Docking station for SIPLACE SX component trolleys 1 Introduction
Edition 02/2018 1.3 Important notes on the user manual
51
1.3.2 Danger notes
1
1.3.3 Manufacturer's/supplier's liability
We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-
ture only and do not contain any contractual conditions or guaranties. The liability and obligations
assumed by ASM Assembly Systems GmbH&Co.KG can be found exclusively in the relevant
contract agreement concerning the supply of the machine described in this manual. This applies
in particular to all statements regarding performance or service life and the agreed liability for
faults or defects. The provisions of the contract regarding the liability for faults or defect are neither
extended nor restricted by any statements in this user manual.
1.3.4 Revision table
1
WARNING
Read the user manual!
Tasks may only be performed by qualified staff who have completed the relevant
training.
Only perform tasks on the machine if you have precise knowledge of the relevant
section in the user manual.
Observe all warnings, caution notes and hazard notes.
Please also read chapter 2 of this user manual through carefully.
Edition Amendments
02/2018 – First edition
1 Introduction User manual Docking station for SIPLACE SX component trolleys
1.4 Further information Edition 02/2018
52
1.4 Further information
1.4.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
1.4.2 SIPLACE on the World Wide Web (WWW)
We also have our own site on the Internet. Why not log onto our SIPLACE home page at http://
www.asm-smt.com.
All the menus and other information are available in two languages: You can choose between the
German and English versions.
The various headings contain information on
– Our products
– Services
– Contacts, etc.
Registered customers can also access the SIPLACE User Group. There you can call up special
information on our placement machines, such as
– Technical documentation
– Technical information
– Spare parts catalogs etc.
Registering for access to the User Group is easy:
Click on ’Register now’.
Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password.