YRM20_Mainte_E.pdf - 第9页
3. Label positions vi Safety instructions No.2 [W ARNING] Electrical shock hazard ■ Panel (rear right) W arning/caution labels Rear ■ Safety cover (rear) ■ Cover inner side No.3 [CAUTION] Feeder reinsertion No.4 [W ARNIN…
3. Label positions
v
Safety instructions
►
Warning/caution labels (front)
No. Label Message Measures
1
Damage to machine or injury to
person.
Before handling the product
(equipment) always read manuals and
make sure you fully understand the
contents.
2
Electrical shock hazard Do not touch power supply inside
cover.
3
The carrier tape could make contact
with the head,
possibly causing machine damage.
When a feeder is extracted from its
loaded position, be sure that the
feeder has been completely extracted
before pressing it back into its loaded
position.
4
Death, serious injury or equipment
malfunction
Observe precautions necessary due to
strong magnetic fields.
5
· Hands or fingers might be caught
between moving parts and covers,
causing injury.
· Hands or fingers might be pinched
by moving parts, causing injury.
Never place hands or fingers in
machine during operation such as
when handling tray magazines.
6
Injury from touching moving parts
during machine operation
Do not touch or tamper with safety
cover switches and do not operate
machine if any safety cover switches
were deactivated.
7
Injury from tape cutter Do not put hands into cutter unit while
power or air is supplied.
8
Could cause machine damage
(collisions with head, etc.).
Verify that no objects have been
placed on the top cover of the feeder
exchange carriage.
9
Electrical shock hazard Do not touch while power is supplied.
10
Machine damage or malfunction Connect power only at the specified
voltage.
3. Label positions
vi
Safety instructions
No.2 [WARNING]
Electrical shock hazard
■ Panel (rear right)
Warning/caution labels
Rear
■ Safety cover (rear)
■ Cover inner side
No.3
[CAUTION]
Feeder reinsertion
No.4 [WARNING]
Strong magnetic field
No.5 [WARNING]
Injuring hands
No.6 [WARNING]
Tampers prohibited
No.8 [CAUTION ]
Crush
■ Upper cover
No.5
[WARNING]
Injuring hands
■ Conveyor opening
(left side)
■ Cutter safety cover (rear)
No.2
[WARNING]
Electrical shock hazard
No.7 [WARNING]
Cut hazard
No.6 [WARNING]
Tampers prohibited
93012-KMX-00
3. Label positions
vii
Safety instructions
►
Warning/caution labels (rear)
No. Label Message Measures
2
Electrical shock hazard Do not touch power supply inside
cover.
3
The carrier tape could make contact
with the head,
possibly causing machine damage.
When a feeder is extracted from its
loaded position, be sure that the
feeder has been completely extracted
before pressing it back into its loaded
position.
4
Death, serious injury or equipment
malfunction
Observe precautions necessary due to
strong magnetic fields.
5
· Hands or fingers might be caught
between moving parts and covers,
causing injury.
· Hands or fingers might be pinched
by moving parts, causing injury.
Never place hands or fingers in
machine during operation such as
when handling tray magazines.
6
Injury from touching moving parts
during machine operation
Do not touch or tamper with safety
cover switches and do not operate
machine if any safety cover switches
were deactivated.
7
Injury from tape cutter Do not put hands into cutter unit while
power or air is supplied.