JO-103-002_w.pdf - 第16页
Safety Precautions Safe-7 AL VEG-ID 3. Alert Labels The alert labels (described below) are used for this jig. Please read the instructions on each label carefully and check the contents, observing the actual object. Be s…
Safety Precautions
Safe-6
ALVEG-ID
Notes on Use (continued)
CAUTION
Do not use any unspecied feeders.
Conrm that the hook at the end of the tape feeder is securely engaged
and the suppressor is not set aoat.
When there is a problem with the feeder adjusting jig, locate the cause
and assess the condition. If necessary, set the breaker of the jig to
"OFF" (Power OFF).
After the problem has been rectied completely, reset the jig to its
normal condition.
Do not give a strong shock to the micrometer by hitting against part of
human body or an object. Otherwise, the micrometer may be damaged,
resulting in inaccurate adjustment of the component pickup position.
0809-002
Safety Precautions
Safe-7
ALVEG-ID
3. Alert Labels
The alert labels (described below) are used for this jig.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.
Location of Alert Labels
The alert labels are af xed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
(1)
Rear Side of Electrical Box
(2)
(4)
(3)
0809-002
Safety Precautions
Safe-8
ALVEG-ID
Alert Labels and Description
No Alert Labels and Description
1
Description
•
This label indicates that high voltage is applied.
Do not touch the labeled area to avoid an electric shock
because power is supplied
to the primary line even when the power breaker is turned off.
2
Description
•
A
void getting your ngers caught in this.
An injury will result.
3
Description
•
Class 2 Laser Product
Do not expose your eyes directly the laser radiation.
4
Description
•
Please read this instruction manual carefully for correct u
se of the jig.
0809-002