JO-103-002_w.pdf - 第18页
Safety Precautions Safe-9 AL VEG-ID 4. Alert Indications in Instruction Manual The following summarizes the precautionary items and the location of alert indications in the instruction manual. Alert Indications described…
Safety Precautions
Safe-8
ALVEG-ID
Alert Labels and Description
No Alert Labels and Description
1
Description
•
This label indicates that high voltage is applied.
Do not touch the labeled area to avoid an electric shock
because power is supplied
to the primary line even when the power breaker is turned off.
2
Description
•
A
void getting your ngers caught in this.
An injury will result.
3
Description
•
Class 2 Laser Product
Do not expose your eyes directly the laser radiation.
4
Description
•
Please read this instruction manual carefully for correct u
se of the jig.
0809-002
Safety Precautions
Safe-9
ALVEG-ID
4. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as " WARNING "
Alert Description Related Items
Those who wear implanted pacemakers should not
handle the tape feeders.
Permanent magnets are used in the tape feeders. The
pacemaker may be affected by the magnetism, causing a
serious accident.
Section 4
2.
Feeder
Measurement
0809-002
WARNING
Safety Precautions
Safe-10
ALVEG-ID
Alert Indications described as " CAUTION "
Alert Description Related Items
•
At least two people are needed to install the feeder
adjusting jig and the personal computer box.
The jig is very heavy. Be sure not to drop it. Otherwise,
your hands and/or feet will get hurt or the jig may be
damaged.
•
Carefully handle the jig and the personal computer
box to avoid your nger being caught in the base.
Otherwise, you may receive a hand or foot injury.
Section 2
1. Procedure for
Jig Installation
•
Before inserting the power plug, be sure to check the
voltage and conrm that it matches the specied one.
Otherwise, the jig unit may break down.
Section 2
Schematic Cable
Distribution
•
The pickup position master is very heavy. Be sure not
to drop it. Otherwise, your feet will get hurt or the jig
may be damaged.
•
The LED illumination unit uses a Class 2 laser beam.
Do not expose your eyes directly the laser radiation.
Otherwise, your eyes will be injured.
Section 4
1. Registration
of Master
Position
(Jig Origin
Adjustment)
•
Be sure not to drop any tape feeder. Otherwise, your
feet will get hurt or the feeder may be damaged.
Do not handle more than two tape feeders at a time and
never drop any feeder.
•
When you install a tape feeder on the adjustment
base, avoid getting your ngers caught between the
end of the feeder and the adjustment base and the
connectors.
•
The master tapes are made of a thin metal. Carefully
handle the tapes to avoid cutting your nger with the
tape edges.
Section 4
2. Feeder
Measurement
0809-002
CAUTION