00194081-01 - 第103页

User Manual SIPLAC E CF 3 Technical data Software Vers ion SR.408.xx 03/2006 US Ed ition 3.10 Nozzle changer for the 6-segm ent Collect&Place head 103 Æ Push the spri ng hook ( item 1) awa y from th e magaz ine. Æ Pr…

3 Technical data User Manual SIPLACE CF

3.10 Nozzle changer for the 6-segment Collect&Place head Software Version SR.408.xx 03/2006 US Edition

102

3.10.6 Changing the magazine

Æ To remove the magazine, push the spring hook (item 1 in Fig. 3.10 - 4) away from the maga-

zine. Lift the magazine out of the carrier.

Fig. 3.10 - 4 Changing the magazine

(1) Spring hook

(2) Retaining clamp

(3) Centering hole

(4) Slot

(5) Carrier

(A) Push the spring hook away from the magazine

PLEASE NOTE 3

Make sure that you insert the magazine so that the centering pins slide into the centering hole

(item 3) and slot (item 4). 3

Æ First place the side of the magazine with the centering hole (item 3) and the slot (item 4) on

the base (5). The two knobs on the magazine must slide into the retaining clamp (item 2).

User Manual SIPLACE CF 3 Technical data

Software Version SR.408.xx 03/2006 US Edition 3.10 Nozzle changer for the 6-segment Collect&Place head

103

Æ Push the spring hook (item 1) away from the magazine.

Æ Press the magazine so that it lies flat on the base, then release the spring hook. The spring

hook must latch into place.

3.10.7 Position detection

There is a position detection fiducial on every magazine.

Fig. 3.10 - 5 Position detection

(1) Positioning fiducial

(2) Position of the nozzles in the magazine with respect to the positioning fiducial

3 Technical data User Manual SIPLACE CF

3.11 PCB conveyor Software Version SR.408.xx 03/2006 US Edition

104

3.11 PCB conveyor

3.11.1 Structure of the PCB conveyor

The placement machine is supplied with a PCB conveyor. The left or the right side of the PCB

conveyor can be used as the stationary side, as required.

Fig. 3.11 - 1 PCB conveyor

(1) Input conveyor

(2) Center conveyor

(3) Output conveyor

(4) Lifting table

(5) Width adjustment

(T) Direction of PCB transport