P-TOOL说明书 - 第169页

3-49 3 Board Editor n Board Graphic View Offset dialog You can change Offset Value from Board Graphic View Offset dialog Board Graphic View Offset dialog 64374-S0-00 When the dialog is closed by pushing the [OK] button a…

100%1 / 228
3-48
3
Board Editor
n
Change Offset Value
To change the offset value, it operates it as follows.
n
Display Board Graphic View Offset dialog
Select“View”-“BoardGraphicViewOffset”menu,andthentheBoardGraphicViewOffsetdialogisopened.
“View” - “Board Graphic View Offset” Menu
64371-S0-00
Opened Board Graphic View Offset dialog
64372-S0-00
Or, it is able to open the Board Graphic View Offset dialog by pushing the [Board Graphic View Offset]
button.
[Board Graphic View Offset] Button
64373-S0-00
3-49
3
Board Editor
n
Board Graphic View Offset dialog
You can change Offset Value from Board Graphic View Offset dialog
Board Graphic View Offset dialog
64374-S0-00
When the dialog is closed by pushing the [OK] button after changing, the offset value after it changing is
reflected in a Graphic View.
There are two kinds of offset values (based the Edge Clamp and the Locate Pin) displayed here.
It is different which to be used according to each machine uses the method of fixing which substrate.
Board Fix Device
64375-S0-00
However,when“LocatePin”settingonthe“MachineProperty”is“None”(itis“MachineInformation”-
“InstallationSetting”),theOffsetValue-“EdgeClamp”isusedalways.
“Machine Information” - “Locate Pin” Exist / None
64376-S0-00
3-50
3
Board Editor
n
Examples of changing Offset value
Thefollowingfigureisagraphicviewthatmakestheoffsetvalue(5mm,5mm).
The larger part is located at the center of board and parts are located at the origin position.
Offset (5mm, 5mm)
64377-S0-10
Itisshowntobearrangedatthepositionof(5mm,5mm)whileselectingpartsatthestartingpointposition
when seen from the substrate coordinates.
Thefollowingfigureisagraphicviewthatmakestheoffsetvalue(0mm,0mm).
The coordinates are different though parts are arranged at the center of the substrate similarly.
Offset (0mm, 0mm)
64378-S0-10
Moreover,partsatthestartingpointpositionarearrangedin(0,0)onthesubstrate.