P-TOOL说明书 - 第189页

4-14 4 F eeder Vie wer You can set conditions to perform a feeder interference check, by selecting “Feeder Viewer Setting” from the Maintenance menu. Mark the check boxes as needed in the dialog box that appears and clic…

4-13

Feeder Viewer

6. [Plan layout] button

Displays the layout of feeder setups, tray changer setups or wafer tray changer setups.

Reference

The [Plan layout] button has the same function as the "Plan layout" command in the View menu.

Setup layout screen

Feeders

Machine name, number of parts whose feeder set position is unspecified,

and total number of mounting points are shown in the center of the layout.

64419-S0-00

7. [Interference check] button

Checks whether the feeder positions interfere with a moving part in each machine.

If feeders that might cause interference are found, a dialog box appears to show a list of those feeder set positions.

(Feeder positions on all machines are checked.)

Reference

The [Interference check] button has the same function as the "Execute interference check of feeder" command in

the View menu.

Dialog box showing results of feeder interference check

64420-S0-00

When you click the [OK] button in the above dialog box, the feeder positions that may cause interference are shown in

red on the feeder setup layout.

NOTE

This interference check also conﬁrms the feeders where no head can reach.

4-14

Feeder Viewer

You can set conditions to perform a feeder interference check, by selecting “Feeder Viewer Setting” from the

Maintenance menu. Mark the check boxes as needed in the dialog box that appears and click the [OK] button.

Setting for feeder interference check

64421--S0-00

8. [Show feeder interference] button

Displays (or hides) the feeders in red that might cause interference.

Reference

This button has the same function as the "Interfere Status" command in the View menu.

Feeder interference check screen

Feeder setup layout

64422-S0-00

NOTE

The feeders where no head can reach are also shown in red.

4-15

Feeder Viewer

9. [Show feeder layout by Board] button

Displays (or hides) the feeder set positions in different colors according to board data used with each machine, by

retrieving them from the board data in the production board list in the left pane.

You can easily check the feeder set positions for each board data.

Reference

This button has the same function as the "Board" command in the View menu.

Feeder color display for each PCB data

Feeder setup layout

Display color

64423-S0-00

Reference

Display color assigned to each board data is indicated in the leftmost column of the production board list. When the

feeders with the same parts are to be installed in the same positions on the feeder plate by different board data,

those feeders are shown in black.

If a check box in the leftmost column is cleared, the feeders used by that board data are not displayed on the feeder

plate layout.

10. [Show parts usage amount] button

Displays (or hides) a “color bar graph” showing the number of parts used with each board data, by retrieving it from the

board data in the production board list in the left pane. You can check how frequently parts will be used from the feeders

on each machine.

Reference

This button has the same function as the "Parts amount" command in the View menu.

Selecting the "Parts frequency" command from the View menu displays or hides the "color bar graph" that shows the

number of parts used with each board data.

Parts usage frequency display screen

Bar graph showing how frequently parts will be used

64424-S0-00