P-TOOL说明书 - 第211页
4-36 4 F eeder Vie wer 3.8 Combining the par ts When parts of the same type are loaded in two or more different feeders, those parts can be combined so that they are supplied from one feeder. c C A UTION T o combine the …
4-35
4
Feeder Viewer
4. If using the divided parts as alternative parts, select the "Select Alternative Parts" check box.
Reference
When the divided parts are specified as alternative parts, the source parts data and divided parts data can be used
as alternative parts for each other by making the following settings just like a loop.
[Example 1]
If parts No.1 data has been divided by 2, and you now have parts No.1 and No.2, make the settings as follows:
• Set the "Alternative Parts" parameter of parts No.1 to "2".
• Set the "Alternative Parts" parameter of parts No.2 to "1".
[Example 2]
If parts No.1 data has been divided by 3, and you now have parts No.1, No.2 and No.3, make the settings as follows:
• Set the "Alternative Parts" parameter of parts No.1 to "2".
• Set the "Alternative Parts" parameter of parts No.2 to "3".
• Set the "Alternative Parts" parameter of parts No.3 to "1".
5. Click the [Multiply] button to divide the parts data.
6. When a dialog box appears indicating that parts data has been divided, click the [OK] button to
quit this function and close the dialog box.
3
Change the feeder set positions of the divided parts.
The feeders for divided parts are displayed on the feeder plate layout by overlaying the divided feeder
on the source part feeder. Move the feeders for divided parts to other positions.
Moving the divided parts feeder
Move the feeder by drag and drop.
64455-S0-00
4
Save the data.
4-36
4
Feeder Viewer
3.8 Combining the parts
When parts of the same type are loaded in two or more different feeders, those parts can be combined so that
they are supplied from one feeder.
c
CAUTION
To combine the parts, their name and feeder type registered in the board data must be the same.
1
Select the parts you want to combine.
On the feeder plate layout, double-click the feeder for parts you want to combine.
The feeder for the selected parts is enclosed by a dotted line.
When the parts setup information list is displayed in the upper grid, the selected parts row is highlighted.
Reference
When the parts setup information list is displayed in the upper grid, you can also select a part by clicking on its row.
2
Execute the “Parts combine” command.
1. Select "Parts combine" from the context menu (right-click menu) that appears when the right mouse
button is clicked on the feeder for the selected parts.
Selecting the "Parts combine" command
64456-S0-00
2. The "Combine Parts" dialog box appears showing a list of parts that can be combined with the
selected parts.
3. Make sure that a check mark is placed in the check boxes for the parts you want to combine, and
then click the [Combine] button.
"Combine Parts" dialog box
Selected parts to perform "Parts combine"
These parts will be combined.
64457-S0-00
4-37
4
Feeder Viewer
4. When the message box appears indicating that the parts have been combined successfully, click
the [OK] button.
5. The message box closes and returns to the plan information screen.
Plan information screen after "Parts combine" has been performed
64458-S0-00
3
Save the data.