DuraBlue II Customer Product Manual - 第168页

Technical Data 8-2 Part 1126931_01  2018 Nordson Corporation Electrical Data WARNING! The unit is designed for only one operating voltage. Operate only at the operating voltage shown on the ID plate. Available operating…

100%1 / 206
Technical Data
8-1
Part 1126931_01
2018 Nordson Corporation
Section 8
Technical Data
General Data
Storage temperature - 45° C to + 75 ° C
- 49 ° F to + 167 ° F
Type of heating Cartridge‐type resistance heating elements
Temperature sensor
— Measuring precision
Ni120 " 1 °C
Material pressure 5 to 85 bar 0.5 to 8.5 MPa 72.5 to 1233 psi
Melting capacity 1 tank‐full per hour
Degree of protection IP 33
Noise emission 1 motor: 60 dBA
2 motors: 66 dBA
Motor type 3 ph AC motor
Gear box type Helical gear
Motor/pump speeds 94 rpm
Heatup time <45 min
Temperatures
Min. ambient temperature - 5 °C 23 °F
Max. ambient temperature 40 ° C 104 °F
Humidity 10 to 95 %, not condensing
Min. operating temperature
(setpoint)
40 ° C 100 °F
Max. operating
temperatures
230 ° C 450 °F
Overtemperature shutdown
by thermostat
260 ° C 500 °F
Technical Data
8-2
Part 1126931_01
2018 Nordson Corporation
Electrical Data
WARNING! The unit is designed for only one operating voltage. Operate
only at the operating voltage shown on the ID plate.
Available operating
voltages
400 V
AC
3‐phase with neutral (star — WYE)
Maximum melter power
requirements
20L 14740 W
45L 16540 W
Operating voltage
frequency
50/60 Hz
Fuse protection Refer to ID plate
Melter Internal Heater
Power Wattage
20L 45L
Grid: 3x900 W Grid: 5x900 W
Manifold: 3x800 W Manifold: 3x800 W
Max. load per hose
receptacle
1000 W, any single hose or applicator
1200 W, any hose/applicator pair
2000 W, sum of hose/applicator pairs 1 and 2
2000 W, sum of hose/applicator pairs 3 and 4
2000 W, any single hose, or applicator 5 or 6
2000 W, hose/applicator pair 5 or 6
4000 W, sum of hose/applicator pairs 5 and 6
NOTE: Total external wattage must not exceed 8,000 W.
Mechanical Data
Item 20L 45L
Weight 205 kg (451 lb) 240 kg (529 lb)
Tank opening (length and
width)
170 x 250 mm 170 x 250 mm
Melter Appearance (length,
width and height)
1250 x 600 x 1230 mm 1250 x 600 x 1230 mm
Approximate tank volume 20 L 45 L
Number of hose connections Single‐stream manifolds: 2 connections per pump stream
Technical Data
8-3
Part 1126931_01
2018 Nordson Corporation
Electrical Schematics
Refer to the electrical schematics provided with the melter.