DuraBlue II Customer Product Manual - 第18页

Safety 1-10  2018 Nordson Corporation Issued 4 − 15 Other Safety Precautions  Do not use an open flame to heat hot melt system components.  Check high pressure hoses daily for signs of excessive wear, damage, or leaks…

100%1 / 206
Safety
1-9
2018 Nordson Corporation
Issued 4-15
Warning or Caution
Equipment
Type
HM
CAUTION! Hot surfaces! Avoid contact with the hot metal surfaces of
applicators, hoses, and certain components of the melter. If contact
can not be avoided, wear heat‐protective gloves and clothing when
working around heated equipment. Failure to avoid contact with hot
metal surfaces can result in personal injury.
HM
CAUTION! Some Nordson melters are specifically designed to
process polyurethane reactive (PUR) hot melt. Attempting to process
PUR in equipment not specifically designed for this purpose can
damage the equipment and cause premature reaction of the hot melt. If
you are unsure of the equipment's ability to process PUR, contact your
Nordson representative for assistance.
HM, CA
CAUTION! Before using any cleaning or flushing compound on or in
the equipment, read and comply with the manufacturer's instructions
and the SDS supplied with the compound. Some cleaning compounds
can react unpredictably with hot melt or cold adhesive, resulting in
damage to the equipment.
HM
CAUTION! Nordson hot melt equipment is factory tested with Nordson
Type R fluid that contains polyester adipate plasticizer. Certain hot melt
materials can react with Type R fluid and form a solid gum that can
clog the equipment. Before using the equipment, confirm that the hot
melt is compatible with Type R fluid.
Safety
1-10
2018 Nordson Corporation
Issued 4−15
Other Safety Precautions
Do not use an open flame to heat hot melt system components.
Check high pressure hoses daily for signs of excessive wear, damage, or
leaks.
Never point a dispensing handgun at yourself or others.
Suspend dispensing handguns by their proper suspension point.
First Aid
If molten hot melt comes in contact with your skin:
1. Do NOT attempt to remove the molten hot melt from your skin.
2. Immediately soak the affected area in clean, cold water until the hot melt
has cooled.
3. Do NOT attempt to remove the solidified hot melt from your skin.
4. In case of severe burns, treat for shock.
5. Seek expert medical attention immediately. Give the SDS for the hot melt
to the medical personnel providing treatment.
Safety
1-11
2018 Nordson Corporation
Issued 4-15
Safety Labels and Tags
Figure 1‐1 illustrates the location of the product safety labels and tags affixed
to the equipment. Table 1‐2 provides an illustration of the hazard
identification symbols that appear on each safety label and tag, the meaning
of the symbol, or the exact wording of any safety message.
5
2
4
3
1
Figure 1‐1 Safety labels and tags
Table 1‐2 Safety Labels and Tags
Item Part Description
1. 1025795
[Tag, warning, hazardous volts]
WARNING: Hazardous voltage.
Disconnect all power supply
connections before servicing.
2. 224906
[Tag, warning, electrical shock]
3. 224905
[Tag, warning, hot]
4. 1025326
[Tag, caution, hot surface]
5. 1021983
[Tag, warning, hot adh/hyd press]