DuraBlue II Customer Product Manual - 第185页

Operating Parameters B-1 1 Part 1126931_01  2018 Nordson Corporation 33 Input 4 Description: Control options that determine the function of input 4. Value: 0 - Input Disabled 1 – Standby On/Off 2 – Motor 1 On/Off 3 – Mo…

100%1 / 206
Operating Parameters
B-10
Part 1126931_01
2018 Nordson Corporation
Input Setup (contd)
31
Input 2
Description:
Control options that determine the function of input 2.
Value:
0 - Input Disabled
1 – Standby On/Off
2 – Heaters On/Off
3 – Motor 1 Enable/Disable
4 – Hose/Applicator 1 Enable/Disable
5 – Hose/Applicator 2 Enable/Disable
6 – Hose/Applicator 3 Enable/Disable
7 – Hose/Applicator 4 Enable/Disable
8 – Hose/Applicator 5 Enable/Disable
9 – Hose/Applicator 6 Enable/Disable
11 - Motor 2 Enable/Disable
Resolution:
1
Default Value:
1
Format:
—
Use:
If Motor Enable/Disable (3) is selected, the motor will not turn on unless the
pump is enabled and the correct voltage is present on the input contacts.
Refer to Installing Melter Inputs in Section 3, Installation, for information about
setting up inputs.
NOTE: Multiple inputs can be set to the same input value. After one or more
inputs that have the same input value are energized, the input functionality will
not be considered inactive (off) until all of the inputs with the same input value
are de‐energized (Multiple inputs set to the same input value are logical ORed.).
32
Input 3
Description:
Control options that determine the function of input 3.
Value:
0 - Input Disabled
1 – Standby On/Off
2 – Heaters On/Off
3 – Motor 1 Enable/Disable
4 – Hose/Applicator 1 Enable/Disable
5 – Hose/Applicator 2 Enable/Disable
6 – Hose/Applicator 3 Enable/Disable
7 – Hose/Applicator 4 Enable/Disable
8 – Hose/Applicator 5 Enable/Disable
9 – Hose/Applicator 6 Enable/Disable
11 - Motor 2 Enable/Disable
Resolution:
1
Default Value:
2
Format:
—
Use:
If Motor Enable/Disable (3) is selected, the motor will not turn on unless the
pump is enabled and the correct voltage is present on the input contacts.
Refer to Installing Melter Inputs in Section 3, Installation, for information about
setting up inputs.
NOTE: Multiple inputs can be set to the same input value. After one or more
inputs that have the same input value are energized, the input functionality will
not be considered inactive (off) until all of the inputs with the same input value
are de‐energized (Multiple inputs set to the same input value are logical ORed.).
Operating Parameters
B-11
Part 1126931_01
2018 Nordson Corporation
33
Input 4
Description:
Control options that determine the function of input 4.
Value:
0 - Input Disabled
1 – Standby On/Off
2 – Motor 1 On/Off
3 – Motor Enable/Disable
4 – Hose/Applicator 1 Enable/Disable
5 – Hose/Applicator 2 Enable/Disable
6 – Hose/Applicator 3 Enable/Disable
7 – Hose/Applicator 4 Enable/Disable
8 – Hose/Applicator 5 Enable/Disable
9 – Hose/Applicator 6 Enable/Disable
11 - Motor 2 Enable/Disable
Resolution:
1
Default Value:
4
Format:
—
Use:
If Motor Enable/Disable (3) is selected, the motor will not turn on unless the
pump is enabled and the correct voltage is present on the input contacts.
Refer to Installing Melter Inputs in Section 3, Installation, for information about
setting up inputs.
NOTE: Multiple inputs can be set to the same input value. After one or more
inputs that have the same input value are energized, the input functionality will
not be considered inactive (off) until all of the inputs with the same input value
are de‐energized (Multiple inputs set to the same input value are logical ORed.).
34 – 39
Optional Inputs 5, 6, 7, 8, 9, and 10
Description:
Control options that determine the function of the six optional inputs provided
when the optional I/O expansion card is installed on the main board.
Value:
0 - Input Disabled
1 – Standby On/Off
2 – Motor 1 On/Off
3 – Motor Enable/Disable
4 – Hose/Applicator 1 Enable/Disable
5 – Hose/Applicator 2 Enable/Disable
6 – Hose/Applicator 3 Enable/Disable
7 – Hose/Applicator 4 Enable/Disable
8 – Hose/Applicator 5 Enable/Disable
9 – Hose/Applicator 6 Enable/Disable
11 - Motor 2 Enable/Disable
Resolution:
1
Default Value:
0 (Disable)
Format:
—
Use:
If Motor Enable/Disable (3) is selected, the motor will not turn on unless the
pump is enabled and the correct voltage is present on the input contacts.
Refer to Installing Melter Inputs in Section 3, Installation, for information about
setting up inputs.
NOTE: When more than one input is set to the same value, the controller follows
the state of the active input.
Operating Parameters
B-12
Part 1126931_01
2018 Nordson Corporation
Output Setup
40 - 42
Outputs 1, 2, and 3
Description:
Determines the function of the output.
Value:
0 = Output Disabled
1 = Ready
2 = Ready and Pump is on
3 = Fault
4 = Low level
5 = Service LED is on
6 = Alert
Resolution:
1
Default Value:
Output 1 = 1
Output 2 = 3
Output 3 = 4
Format:
—
Use:
Refer to Installing Melter Outputs in Section 3, Installation, for information on
setting up outputs.
When control option 6, Alert is selected, the output is active whenever the melter
enters the two minute fault monitoring period. If the potential fault condition
clears before the end of the two minute period, the output signal ends. Refer to
Section 4, Operation, Monitor Melter Faults, for information about fault
monitoring.
43 - 46
Optional Outputs 4, 5, 6, and 7
Description:
Control options that determine the function of the four optional outputs provided
when the optional I/O expansion card is installed on the main board.
Value:
0 = Output Disabled
1 = Ready
2 = Ready and Pump is on
3 = Fault
4 = Low level
5 = Service LED is on
6 = Alert (Potential fault)
Resolution:
1
Default Value:
1 (all optional outputs)
Format:
—
Use:
Refer to the instruction sheet provided with the optional I/O expansion card for
information about wiring and setting up the optional outputs.
When control option 6, Alert is selected, the output is active whenever the melter
enters the two minute fault monitoring period. If the potential fault condition
clears before the end of the two minute period, the output signal ends. Refer to
Section 4, Operation, Monitor Melter Faults, for information about fault
monitoring.