DuraBlue II Customer Product Manual - 第193页
Operating Parameters B-19 Part 1126931_01 2018 Nordson Corporation PID Selection 80-91 PID Selection for Receptacles, Hose/Applicator 1, 2, 3 and 4 Description: Used to change the preset PID selections. Use parameter 8…
Operating Parameters
B-18
Part 1126931_01
2018 Nordson Corporation
Seven‐day Clock (contd)
68 Schedule 3 Exit Standby
Description:
Used to set the time that the melter will exit the standby mode during schedule 3.
Value:
0000 to 2359, ‐ ‐ ‐ ‐
Resolution:
1 minute
Default Value:
‐ ‐ ‐ ‐
Format:
Hour, Hour: Minute, Minute
Use:
Set the time that the melter will exit the standby mode during schedule 3.
To disable this parameter, set the parameter's value to “‐ ‐ ‐ ‐” by simultaneously
pressing both of the right‐display scroll keys.
Note: Do not set an exit standby time that is outside of the time period defined
by the schedule's heater on and off time. The melter cannot enter the standby
mode when the heaters are off.
71-
77
Schedules for the Days of the Week
Description:
Used to select which schedule(s) should be used on a specific day of
the week.
Value:
0 – Remain at last clock transition
1 – Use just schedule 1
2 – Use just schedule 2
3 – Use just schedule 3
4 – Use schedule 1 and 2
5 – Use schedule 2 and 3
6 – Use schedule 1 and 3
7 – Use schedule 1, 2, and 3
Resolution:
1
Default Value:
0
Format:
—
Use:
Selects the active schedule(s) for the day.
NOTES: If the 0 schedule option is used, the heaters will not turn on
again until the next scheduled heaters on time arrives.
Operating Parameters
B-19
Part 1126931_01
2018 Nordson Corporation
PID Selection
80-91
PID Selection for Receptacles, Hose/Applicator 1, 2, 3
and 4
Description:
Used to change the preset PID selections. Use parameter 80 to select the value
for hose1, parameter 81 to select the value for applicator 1, and so on.
Value:
0 = Hose
1 = Standard gun
2 = Large gun
3 = Air heater
Resolution:
—
Default Value:
0 or 1 depending on the channel type (hose or gun)
Format:
—
Use:
Consult your Nordson representative before changing PID settings.
Operating Parameters
B-20
Part 1126931_01
2018 Nordson Corporation
This page intentionally left blank.