DuraBlue II Customer Product Manual - 第194页

Operating Parameters B-20 Part 1126931_01  2018 Nordson Corporation This page intentionally left blank.

Operating Parameters

B-19

Part 1126931_01

 2018 Nordson Corporation

PID Selection

80-91

PID Selection for Receptacles, Hose/Applicator 1, 2, 3

and 4

Description:

Used to change the preset PID selections. Use parameter 80 to select the value

for hose1, parameter 81 to select the value for applicator 1, and so on.

Value:

0 = Hose

1 = Standard gun

2 = Large gun

3 = Air heater

Resolution:

—

Default Value:

0 or 1 depending on the channel type (hose or gun)

Format:

—

Use:

Consult your Nordson representative before changing PID settings.

Operating Parameters

B-20

Part 1126931_01

 2018 Nordson Corporation

This page intentionally left blank.

Melter Communications

C-1

Part 1126931_01

 2018 Nordson Corporation

Appendix C

Melter Communications

This appendix describes the installation and use of the Nordson

Configuration Manager (NCM) communications utility. With this utility you

can:

 transfer operating parameters and temperature set‐points between

melters

 upgrade or reload your melter's firmware

Software Availability

If you do not already have the NCM utility, you can download it from

http://emanuals.nordson.com/adhesives/software/BlueSeriesSoftware.html.

System Requirements

The following hardware and software requirements are necessary to install

and run Blue Series software:

 Any DuraBlue II, AltaBlue, ProBlue, or DuraBlue 10/16 adhesive

melter

 Serial cable

 Personal Computer with:

‐ CD-RW drive or 3.5-inch floppy drive

‐ Available COM port

‐ 640 x 480 color monitor

‐ Windows 95, 98 (second edition), ME, XP, or 2000

‐ Internet Explorer version 4.0 or later (IE 5.0 is recommended)

‐ Administrative privileges (Windows XP, 2000, and NT)