DuraBlue II Customer Product Manual - 第197页

Melter Communications C-3 Part 1126931_01  2018 Nordson Corporation To install Blue Series software 1. Do one of the following:  If you are installing using the single file installation , locate and double‐click on the…

Melter Communications

C-2

Part 1126931_01

 2018 Nordson Corporation

Installing the Software

To meet your specific installation conditions, two versions of the software are

available. Refer to Table C‐1 to determine which version you need.

Table C-1 Blue Series Software Versions

Version Use When...

Single installation file:

BlueSeries.exe

You are downloading the software from www.enordson.com and the PC you are

downloading onto is connected or can be connected to the melter

You are downloading the software from www.enordson.com onto a PC that can not be

connected to the melter, but the PC does have a CD‐RW and the PC that is connected to

the melter does have a CD drive

You have a CD with the software and you have a PC with a CD drive that can be

connected to the melter

Self‐extracting span diskette set:

BlueSeriesSpan.exe

You are downloading the software from www.enordson.com onto a PC that cannot be

connected to the melter and the PC that is connected to your melter only has a 3.5‐inch

floppy drive

When the installation file is executed, an installation wizard will detect your

operating system and start the installation routine.

NOTE: Installing the NCM for the first time also installs the latest version of

the melter's firmware.

Melter Communications

C-3

Part 1126931_01

 2018 Nordson Corporation

To install Blue Series software

1. Do one of the following:

 If you are installing using the single file installation, locate and

double‐click on the file BlueSeries.exe.

 If you are installing from the span diskette set, insert Disk 1, and

then locate and double‐click on the file Setup.exe.

The Blue Series Software Setup wizard appears.

2. Click Next, and then follow the on‐screen instructions. If you are installing

from the span disk set, you will be prompted to insert additional diskettes

(2 through 5) as required by your operating system.

NOTE: When prompted to select an installation location, Nordson

Corporation recommends that you select the default location offered.

3. When the installation complete message appears, click Finished.

Melter Communications

C-4

Part 1126931_01

 2018 Nordson Corporation

Removing the Software from Your PC

Use the Remove feature provided by the Blue Series InstallShield Wizard

to remove the software from your PC. Removing Blue Series software from

your PC will not remove melter settings files that you have saved using the

NCM. Settings files (.ncm extension) are stored in your Windows My

Documents folder.

NOTE: Windows XP, 2000, and NT users must have administrator rights in

order to remove software from their PC.

To remove Blue Series software

1. From the Windows Start menu, select Settings > Control Panel, and then

double‐click Add/Remove Programs.

The Add/Remove Programs dialog box appears.

2. Select Blue Series Software from the list, and then click Remove.