DuraBlue II Customer Product Manual - 第20页
Safety 1-12 2018 Nordson Corporation Issued 4 − 15
Safety
1-11
2018 Nordson Corporation
Issued 4-15
Safety Labels and Tags
Figure 1‐1 illustrates the location of the product safety labels and tags affixed
to the equipment. Table 1‐2 provides an illustration of the hazard
identification symbols that appear on each safety label and tag, the meaning
of the symbol, or the exact wording of any safety message.
5
2
4
3
1
Figure 1‐1 Safety labels and tags
Table 1‐2 Safety Labels and Tags
Item Part Description
1. 1025795
[Tag, warning, hazardous volts]
WARNING: Hazardous voltage.
Disconnect all power supply
connections before servicing.
2. 224906
[Tag, warning, electrical shock]
3. 224905
[Tag, warning, hot]
4. 1025326
[Tag, caution, hot surface]
5. 1021983
[Tag, warning, hot adh/hyd press]
Safety
1-12
2018 Nordson Corporation
Issued 4−15
Introduction
2-1
Part 1126931_01
2018 Nordson Corporation
Section 2
Introduction
Intended Use
DuraBlue
II adhesive melters may be used only to melt and convey suitable
materials, e.g. thermoplastic hot melt adhesives.
Any other use is considered to be unintended. Nordson will not be liable for
personal injury or property damage resulting from unintended use.
Intended use includes the observance of Nordson safety instructions.
Nordson recommends obtaining detailed information on the materials to be
used.
Electromagnetic Compatibility (EMC)
In regard to electromagnetic compatibility (EMC), the melter is intended for
use in industrial applications.
When operated in residential or commercial areas, the melter may cause
interference in other electrical units, e.g. radios.