DuraBlue II Customer Product Manual - 第90页

Operation 4-28 Part 1126931_01  2018 Nordson Corporation This page intentionally left blank.

Operation

4-27

Part 1126931_01

 2018 Nordson Corporation

Record of Melter Settings

Production information:

Material: Manufacturer

Processing Temperature

Viscosity

Cleaning agent: Manufacturer

Flash point

Processing temperatures (Setpoint temperatures):

Tank/Grid/Reservoir

Hose 1) 2) 3) 4) 5) 6)

Applicator 1) 2) 3) 4) 5) 6)

Pump speeds:

Pump 1) 2)

Notes:

Name Date

Operation

4-28

Part 1126931_01

 2018 Nordson Corporation

This page intentionally left blank.

Service

5-1

Part 1126931_01

 2018 Nordson Corporation

Section 5

Service

WARNING! Allow only qualified personnel to perform the following tasks.

Follow the safety instructions in this document and all other related

documentation.

Maintenance is an important preventive measure for maintaining operating

safety and extending the lifetime of the unit. It should not be neglected under

any circumstances.

Relieving System Pressure

WARNING! System and material pressurized. Relieve system of pressure

before disconnecting hoses, applicators and hot melt hand‐held applicator.

Failure to observe can result in serious burns.

Through the Applicators

1. Disable the motor(s). Refer to Section 4, Operation.

2. Place a container under the nozzle(s) of the applicator/assembly

hand‐held applicator.

3. Activate the solenoid valve(s) electrically or manually; or, pull the trigger

of the assembly hand‐held applicator. Repeat this procedure until no

more material flows out.

4. Re‐use the material or properly dispose of it according to local

regulations.