OM-1833-001w_SL - 第115页
1504-001 Remedy : Make sure that there is no twist in the tape or that it’ s not been caught in the reel, and then, load the tape again. In the case that the tape perforations are not aligned, cut the tape end and load t…
9.4 Normal Loading Operation is not available
Remedy
: Set the tape again up to the sprocket (3).
Set the tape to the position much deeper
than the sprocket (3) summit position.
Cause : The tape has not been set up to the correct position.
Remedy
: Set the loading suppressor again up to the correct position.
NG
OK
The loading suppressor has not been locked.
Cause : The loading suppressor has not been set up to the correct position.
1504-001
9.4 Normal Loading Operation is not available
OM-1833
9-6
1504-001
Remedy
: Make sure that there is no twist in the tape or that it’s not been caught in the reel, and
then, load the tape again.
In the case that the tape perforations are not aligned, cut the tape end and load the tape
again.
Tape Twist
Cause : The loading operation is stopped in the course of the loading operation.
9.4 Cover Tape Take-up Action not performed
Remedy
: Make sure that the tape is not left in the cover tape processing unit. If the tape is left,
remove it and load the tape again.
Cause : The loading operation is not available at all.
Tape Detection Sensor
OM-1833
9-7
1504-001
OM-1833
9-8