OM-1833-001w_SL - 第36页

OM-1833 1-16

1504-001

[9] Suppressor

This suppressor presses the tape against the chute to perform stable tape

feeding and control any component irregular movement

[10] Cover Tape Processing Section

This cover tape processing section is used to enable the component pick-up

in the pick-up section.

[11] Component Pick-up Section

The component is picked up from the tape through this hole. The nozzle is

moved down onto this position to pick up the component.

[12] Tape Outlet Guide

This guide discharges the tape.

[13] Tape Outlet Guide

(At the succeeding tape set-up)

When the succeeding tape for the component reload is to be set, the traveling

route for the preceding tape changes to this position.

[14] Connector

This connector conducts electricity and electrical signals.

1.5 Name and Function of Each Section

OM-1833

1-15

OM-1833

1-16

1504-001

2. Attachment and Detachment of Tape

Table End Cutting Position

•

For Tape Width: 8 mm, Feed Pitch: 1 mm

Cut the tape at the back end of the third perforation from the one ahead of the

last pocket where a component has been put.

Pockets where a

component has

been put

123

Cutting Position

(Back end of the perforation)

Perforation ahead of the

last pocket where a component has been put

No. of Empty Pockets: 8 to 10

Fig. B1

•

For Tape Width: 8 mm, Feed Pitch: 2 mm

Cut the tape at the back end of the third perforation from the one ahead of the

last pocket where a component has been put.

Pockets where a

component has

been put

123

Cutting Position

(Back end of the perforation)

Perforation ahead of the

last pocket where acomponent has been put

No. of Empty Pockets: 4 to 5

Fig. B2

•

For Tape Width: 8 mm, Feed Pitch: 4 mm

Cut the tape at the position of 1/4 of the fourth perforation from the one ahead

of the last pocket where a component has been put.

Pockets where a

component has

been put

123

Cutting Position

(1/4 position of the perforation)

Perforation ahead of thelast

pocket where a component has

been put

No. of Empty Pockets: 3

Fig. B3

OM-1833

2-1