OM-1833-001w_SL - 第40页

1504-001 2.1 T ape Attachment Procedure (4) Push down the lever to lift the roller and insert the tape about 10mm, so that the tape is engaged with the sprocket (3) gear . Tape setup completed Roller Lever Fig. B8 (5) Pe…

2.1 Tape Attachment Procedure

1504-001

2.1 Tape Attachment Procedure

Procedure

(1) Slide the loading suppressor forward on the lane where the tape is to be set

up to prepare for tape insertion.

Suppressor

Slide it forward.

Fig. B5

(2) Insert the tape.

Fig. B6

(3) Insert the tape so that the end of the tape contacts the sprocket (3) gear.

Insert the

tape end to

this position.

Sprocket(3)

Fig. B7

OM-1833

2-3

1504-001

2.1 Tape Attachment Procedure

(4) Push down the lever to lift the roller and insert the tape about 10mm, so that

the tape is engaged with the sprocket (3) gear.

Tape setup completed

Roller

Lever

Fig. B8

(5) Perform the tape loading operation. After selecting the lane using the

button on the operation panel, hold down the

button for one second.

(After 1-second pressing and holding-down operation of the button is

detected, the tape loading operation starts and the tape is carried in the

component pick-up position automatically.)

Digital IndicatorLane Selection Button

Forward ButtonBackward Button

Take-up Button

Fig. B9

Note

Start-up Conditions:

The tape detection sensor (2) should be turned ON.

The tape has not been set up.

OM-1833

2-4

1504-001

2.2 Tape Removal Procedure

Procedure

(1) Slide the loading suppressor to this side on the lane where the tape is to be

removed, and widen the tape insertion opening.

Suppressor

Slide it to this side.

Fig. B10

(2) Perform the tape unloading operation.

After selecting the lane using the

button on the operation panel, press

the

button and within one second, press the button. (The tape will

reverse backward).

Digital IndicatorLane Selection Button

Forward ButtonBackward Button

Take-up Button

Fig. B11

Note

Start-up Conditions:

The tape detection sensor (1) is turned ON and the tape has been setup, or

the tape detection sensor (2) is turned OFF and the tape has been setup.

OM-1833

2-5