OM-1833-001w_SL - 第55页
1504-001 3.3 Multi-Reel Stocker (Option) Multi-Reel StockerThis stocker is used to enable the simultaneous setting operation of the preceding tape and succeeding component reloading tape in each lane.(A total of eight sm…
3.2 Tape Feeder Detachment Procedure
CAUTION
Do not drop the tape feeder, when attaching or
detaching.
Some tape feeder models are rather heavy.
In the case that the feeder is removed with one hand, your
hand might not be able to support the feeder weight when
it is removed from the base, which might cause a fall of
the feeder.
Falling of a tape feeder might cause an injury on your feet
or damage to the feeder.
Hold such feeder with your both hands one by one and
take care not to drop it.
Procedure
(1) Press the clamp cancel lever.
(2) Draw the tape feeder carefully to this side.
Clamp Cancel Lever
Fig. C5
1504-001
3.2 Tape Feeder Detachment Procedure
OM-1833
3-6
1504-001
3.3 Multi-Reel Stocker (Option)
Multi-Reel StockerThis stocker is used to enable the simultaneous setting operation
of the preceding tape and succeeding component reloading tape in each lane.(A
total of eight small reels can be set within the width as much as the feeder’s two
slots allow)
6/05
IRU6,*0$*
6/05
IRU6,*0$)*6
Hook
Hook
Fig. C6
Model No. and No. of Loadable Units
Table C2
No.
Applicable
machine
Model
Maximum
number
loadable
Number of
small reels set
Remarks
1 SIGMA-G5 SL-MR200 13 104 104 = 4 Lane × 2 Reel × 13 Stocker
2 SIGMA-F8
SL-MR800
10 80 80 = 4 Lane × 2 Reel × 10 Stocker
3 SIGMA-G5S 13 104 104 = 4 Lane × 2 Reel × 13 Stocker
3.3 Multi-Reel Stocker (Option)
OM-1833
3-7
1504-001
3.3 TMulti-Reel Stocker (Option)
Procedure
• SIGMA-G5
(1) Catch the multi-reel stocker hook on the cart bar.
Cart Bar
Multi-Reel
Stocker
Fig. C7
•
SIGMA-F8/G5S
(1) Catch the multi-reel stocker hook on the Gap in the Cart.
Gap in the Cart
Multi-Reel
Stocker
Fig. C8
OM-1833
3-8