OM-1833-001w_SL - 第80页

5.4.3 Loading Unit Preceding Tape Travel Guide Loading Suppressor Every Week Cleaning : Remove debris and dust using the air gun. Remove any attachment on the bearing or roller using a rag soaked in alcohol or cotton app…

Pick-up Position

Every Three Months Adjustment :

Check the pick-up position using the

feeder-adjusting jig JG-0209 (to be

purchased separately) and if there is any

non-conformity, adjust it.

Fig. E4

1504-001

5.4 Maintenance Spots

OM-1833

5-7

5.4.3 Loading Unit

Preceding Tape Travel Guide

Loading Suppressor

Every Week Cleaning :

Remove debris and dust using the air gun.

Remove any attachment on the bearing or

roller using a rag soaked in alcohol or

cotton applicator.

Every Three Months Cleaning :

Every Week Cleaning :

Remove debris and dust using the air gun.

Remove any attachment on the roller using

a rag soaked in alcohol or cotton applicator.

Every Three Months Cleaning :

Fig. E5

Sprocket (3) (Tip Gear)

)

Every Three Months Cleaning :

Remove anything attached to the tooth tips

using a rag soaked in alcohol or cotton

applicator.

Sprocket (3) (Oiling port)

Every Three Months Lubrication :

Fill Molynoc Grease API from the oil port

using the oiling jig.

The upper oil port is used for

lane #1 and the lower oil port

is used for lane #2.

Note

Fig. E6

1504-001

5.4 Maintenance Spots

OM-1833

5-8

Flat End

Tape Present/Adsent Sensor

Every Three Months Cleaning :

Remove the cover from the loading unit

and remove any debris or dust using the

air gun.

Every Three Months Lubrication :

Remove the cover from the loading unit

and apply Molynoc Grease API on the

spur gears using the oiling jig.

The spur gears on the right

side are used for lane #1 and

the spur gears on the left side

are used for lane #2.

Note

Fig. E7

1504-001

5.4 Maintenance Spots

OM-1833

5-9