OM-1833-001w_SL - 第83页

5.5 Maintenance Method 5.5.1 Cover Removal and Attachment 5.5.1.1 Cover LA Removal Procedure Procedure (1) Remove the countersunk set screw for xing the cover LA (4 locations). Screw Hole (4 locations) Fig. E9 (2) Slide…

100%1 / 122
5.4.4 Tape Feeding Unit
Sprocket (2) (Oiling port)Sprocket (2) (Tip Gear)
Every Three Months Cleaning :
Remove anything attached to the tooth tips
using a rag soaked in alcohol or cotton
applicator.
Every Three Months Lubrication :
Fill Molynoc Grease API from the oil port
using the oiling jig.
The upper oil port is used for
lane #1 and the lower oil port
is used for lane #2.
Sprocket (1) (Oiling port)
Sprocket (3) (Tip Gear)
Every Three Months Cleaning :
Remove anything attached to the tooth tips
using a rag soaked in alcohol or cotton
applicator.
Every Three Months Lubrication :
Fill Molynoc Grease API from the oil port
using the oiling jig.
The upper oil port is used for
lane #1 and the lower oil port
is used for lane #2.
Note
Note
Fig. E8
1504-001
5.4 Maintenance Spots
OM-1833
5-10
5.5 Maintenance Method
5.5.1 Cover Removal and Attachment
5.5.1.1 Cover LA Removal Procedure
Procedure
(1) Remove the countersunk set screw for xing the cover LA (4 locations).
Screw Hole
(4 locations)
Fig. E9
(2) Slide he cover LA in the arrow direction.
Fig. E10
(3) Then slide the cover LA in the arrow direction (upper) to remove.
Fig. E11
1504-001
5.5 Maintenance Method
OM-1833
5-11
1504-001
5.5.1.2 Left Side Cover #1 Attachment Procedure
Procedure
(1) Push the claws of the cover LA into the slits in the frame #1.
Fig. E12
(2) Slide the cover LA in the arrow direction (to the right) to set the claws under
the other cover.
Set the
claws under it.
Fig. E13
(3) Attach the countersunk screws to x the cover LA (4 locations).
Screw Hole
(4 locations)
Fig. E14
5.5 Maintenance Method
OM-1833
5-12