YAMAHA errer code-a - 第15页

Ea - 15 ERROR MESSAGES LIST Ea Ea00691 Ea00692 Ea00693 Ea00700 Ea00701 Ea00702 Ea00703 Ea00704 Ea00705 Ea00706 Ea00707 Ea00710 There is no more than two componet data. In this condition, this function is not available. Y…

Ea -14

ERROR MESSAGES LIST

Ea00665

Ea00666

Ea00667

Ea00668

Ea00669

Ea00670

Ea00671

Ea00672

Ea00673

Ea00674

DATA ERROR

Failed to distribute nozzles.

DATA ERROR

Failed to distribute mount data.

FILE ERROR

Failed to write PCB Data.

Failed to read Machine Equipment Data.

DATA GENERATOR OBJECT ERROR

Dummy file for DATA GENERATOR doesn't exist.

Possible cause :

1.Object PCB hasn't been selected.

2.Dummy file was deleted because of error.

Counter measures :

1.Select PCB.

2.Select [A1 OBJECT SELECTION] and exit.

DATA GENERATOR OBJECT ERROR

Dummy file for DATA GENERATOR doesn't exist.

Possible cause :

1.Object PCB or line hasn't been selected..

2.Dummy file was deleted because of error.

Counter measures :

1.Select PCB and line.

2.Select [A1 OBJECT SELECTION] and exit.

DATA GENERATOR OBJECT ERROR

This command is not available until you select PCB data.

DATA GENERATOR OBJECT ERROR

This command is not available until you select PCB data

and line.

You have not specified a Machine Number. Please se-

lect, at least, one number.

The dummy file for current object PCB will be deleted.

Will you continue? To abort this process, press [ESC] key.

Nozzle settings are shown below.

A TABLE:[Upper = Head No., Lower = Nozzle Type]

Head 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Nzl. 1 1 1 2 2 2 2 2 2 2 2 3 3 4 4 5

B TABLE:[Upper = Head No., Lower = Nozzle Type]

Head 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Nzl. 1 1 1 2 2 2 2 2 2 2 2 3 3 4 4 5

Nozzle settings are shown below.

Machine 2

A TABLE:[Upper = Head No., Lower = Nozzle Type]

Head 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Nzl. 1 1 1 2 2 2 2 2 2 2 2 3 3 4 4 5

B TABLE:[Upper = Head No., Lower = Nozzle Type]

Head 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Nzl. 1 1 1 2 2 2 2 2 2 2 2 3 3 4 4 5

This PCB is already selected.

(meaning)An error occurred in the nozzle layout when the data was

created.

(cause)If a feeder has already been fixed in that position, the nozzle

could not be positioned in a place where it is possible to pick up

components.

(remedy)Change the position of the fixed feeder.

(meaning)An error occurred in the layout in the mounting data.

(cause)If the data is too complex, an error occurs in the mounting

data and the feeders cannot be positioned.

(remedy)Shift part of the data to another machine.

(meaning)An error occurred in writing the PCB data.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. In any other case, check to see how

often the problem occurs, and contact the manufacturer.

(meaning)An error occurred when reading the model information.

(cause)The software versions do not match, or the model setting

does not match the registered machine data.

(remedy)Register the machine data again and check the versions.

If the versions are different, contact the manufacturer.

(meaning)The dummy file which has to serve as a target for creat-

ing the data does not exist.

(cause)The PCB name has not been selected; the dummy file has

been erroneously deleted; or no line has been selected

(remedy)Select the PCB line.

(meaning)Because PCB data is not selected, the command is not

available.

(cause)Same as above.

(remedy)Select PCB data before executing the command.

(meaning)Because PCB data,line is not selected, the command is

not available.

(cause)Same as above.

(remedy)Select PCB, line before executing the command.

(meaning)The machine number which serves as the target for cre-

ating data has not been selected.

(cause)Same as above.

(remedy)Select the machine.

(meaning)The dummy file of PCB data which currently serves as

the target for creating data will be lost if the command about to be

executed is actually executed.

(cause)Same as above.

(remedy)If losing the dummy file will cause problems, press the

ESC key. If the dummy file can be deleted, press any other key.

(meaning)This shows how the nozzles will be attached as speci-

fied by the PCB data, following creation of the data.

(cause)None

(remedy)None

(meaning)The PCB you are trying to select has already been se-

lected.

(cause)Same as above.

(remedy)None

Ea00675

Ea00676

Ea00677

Ea00678

Ea00679

Ea00680

Ea00681

Ea00682

Ea00683

Ea00684

Ea00690

You cannot select any more PCB.

No type of nozzle can pickup the component.

Component 150

Check Point:

Required Nozzle(Component data)

Nozzle Information

No head to attach the nozzle to in order to pickup the

component.

Component 150

Check Point:

Nozzle Setting (In case of NO_NOZZLE_SUGGESTION)

Feeder Position (In case of fixed feeder)

Un-used Head (In case of 112)

Failed to distribute feeder.

No place to fix the component.

Component 150

Check Point: Fix the position of the component.

Failed to copy PCB data.

NOZZLE SET INFORMATION ERROR

The selected nozzle cannot be fixed to this head.

COMMAND ERROR

[A2 NOZZLE SETTING] is available only in the case that

you select EDITING for NZL.CONDITION SEL.

But you can change to EDITING temporarily. (while you

don't exit from making data mode) If you want to change,

push the [ENTER] key. If you don't want to change, push

any other key.

No head available to handle the component.

Component 150

Check Point:

Component Size

Required Nozzle(Component data)

Wait a moment while

copying PCB data....

Nozzle settings are shown below.

XY TABLE[Upper = Head No., Lower = Nozzle Type]

Head 1 2 3 4 5 6 7 8

Nzl. 1 1 1 2 2 2 2 2

Nozzle settings are shown below.

Machine 2

XY TABLE[Upper = Head No., Lower = Nozzle Type]

Head 1 2 3 4 5 6 7 8

Nzl. 1 1 1 2 2 2 2 2

There is no more than two mount data.

In this condition, this function is not available. You can not

select "REPLACE" or "MULTIPLY COMPONENT" when

Component data is not available.

(meaning)The number of PCBs you are trying to select as fixed

PCBs for data creation exceeds the allowable number

(cause)An attempt was made to register five or more PCBs as fixed

PCBs.

(remedy)Select one of the PCBs already registered as a fixed PCB

and cancel it.

(meaning)An attempt was made to pick up components without an

appropriate nozzle. |

(cause)The setting in the component data for the nozzles to be used

is wrong.

(remedy)Go back to the editing screen and check the component

data.

(meaning)There is no head to which a nozzle which can be used to

pick up the components can be attached.

(cause)If the setting for the recommended nozzle is set to "None",

the nozzles has already been decided by the user, and there is no

empty space; or a fixed feeder is being used, and the appropriate

nozzles cannot be attached to a head which will reach that feeder.

Also, it may be that a head has been installed which cannot move

into the work area, so the nozzle cannot be attached to it.

(remedy)Go back to the editing screen and change the nozzle posi-

tion or the feeder position.

(meaning)An error occurred in the feeder layout when creating the

data.

(cause)Because the data is too complex, ultimately there are no

more places where feeders can be attached. Or there are too many

feeders, so that the layout is logistically impossible

(remedy)Try fixing the setting position for the component where the

problem is occurring, or shift that component to another machine.

(meaning)An error occurred in copying the PCB data.

(cause) There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. In any other case, check to see how

often the problem occurs, and contact the manufacturer.

(meaning)When the nozzle configuration was edited, a setting was

used which attaches a nozzle to a head which can not accommo-

date that nozzle.

(cause)Same as above.

(remedy)Do not attach that nozzle to that head.

(meaning)The nozzle setting is possible only when the nozzle set-

ting conditions are edited manually.

(cause)The nozzle setting was selected even though the nozzle

setting conditions must be edited manually.

(remedy)Do not change that setting, or edit the setting conditions

manually.

(meaning)No head exists which can be used with the components.

(cause)Because the components are too big, there is no head to

which an appropriate nozzle can be attached, or there is something

wrong with the component data setting specifying the nozzle to be

used.

(remedy)Go back to the editing screen and check the component

data.

(meaning)PCB data is being copied. This is not an error message.

(cause)None

(remedy)Please wait until the data has been copied.

(meaning)The bulk substitution and component separation functions

cannot be used because there is no data in the placing information.

(cause)No placing information exists.

(remedy)Input the placing data.

Ea -15

ERROR MESSAGES LIST

Ea00691

Ea00692

Ea00693

Ea00700

Ea00701

Ea00702

Ea00703

Ea00704

Ea00705

Ea00706

Ea00707

Ea00710

There is no more than two componet data.

In this condition, this function is not available. You can not

select "REPLACE" or "MULTIPLY COMPONENT" when

Component data is not available.

There is no more than two mount or component data.

In this condition, this function is not available. You can not

select "RENUMBER COMPONENT" tavailable. when

Component data or Mount data is not available.

Not find new Component number All component number

used

Failed to open component information.

Failed to read component information.

Failed to write component information.

Component information are not selected.

There are components on destination whose name is

same as the one shown below. Would you continue?

Component 3

Component Name R3216

[ESC] key to abort

Other key to continue

The component shown below can not be moved because

it doesn't fulfill the condition.

Component 3

Component Name R3216

The condition for moving component

Not using fixed component reference function

Using feeder optimization

The component shown below uses "Teaching" for "Feeder

Position". Would you continue?

Component 3

Component Name R3216

[ESC] key to abort

Other key to continue

The component is multipled.

Would you define as the alternate component?

[ESC] key is not.

Other key is defined.

Failed to open PCB data.

Machine 2

PCB CUK93001

(meaning)The bulk substitution and component separation func-

tions cannot be used because there is no component data.

(cause)No component information exists.

(remedy)Input the component information.

(meaning)The component number control function cannot be used

because there is no data in the component or placing information.

(cause)There is no component or placing information.

(remedy)Input the component or placing information.

(meaning)Editing is not possible because there is not enough space

available for the remaining component data that has to be regis-

tered.

(cause)There is too much component data registered which is not

needed, or there is too much component data which is actually

being used.

(remedy)If too much unnecessary data has been registered, de-

lete some of it. In any other case, the supplementary editing func-

tion cannot be used.

(meaning)An error occurred in the component in formation file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. In any other case, check to see how

often the problem occurs, and contact the manufacturer.

(meaning)An error occurred in the component in formation file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. In any other case, check to see how

often the problem occurs, and contact the manufacturer.

(meaning)An error occurred in the component in formation file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. In any other case, check to see how

often the problem occurs, and contact the manufacturer.

(meaning)Component information has not been selected.

(cause)Same as above.

(remedy)Select the component information.

(meaning)When components are being moved in the component

information, a component with the same name already exists at

the destination location.

(cause)A component with the same name is already located at that

destination.

(remedy)If having two components with the same name at the des-

tination is not a problem, go ahead with the shift. Otherwise, press

the ESC key to interrupt the shift.

(meaning)In the group of comp. being moved in the component

information screen, a component exists which uses fixed compo-

nent reference function. The component will not be moved.

(cause)Same as above.

(remedy)No remedy.

(meaning)In the group of components being moved on the compo-

nent information screen, feeder position coordinates exist which

are teaching data.

(cause)Same as above.

(remedy)To cancel the movement because of the position coordi-

nate teaching, press the ESC key. To continue the movement press

any other key.

(meaning)When you execute the multiply component, you select

whether using alternate component or not. This component is al-

ready alternated, this function is not used.

(cause)

(remedy)

(meaning)An error occurred when opening the PCB file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. In any other case, check to see how

often the problem occurs, and contact the manufacturer.

Ea00711

Ea00712

Ea00713

Ea00715

Ea00720

Ea00721

Ea00722

Ea00723

Ea00724

Ea00725

Ea00726

Failed to read PCB data.

Machine 2

PCB CUK93001

Failed to write PCB data.

Machine 2

PCB CUK93001

Failed to copy PCB data.

Machine 2

PCB CUK93001

Failed to fix the component in PCB.

Machine 2PCB CUK93001

Fixed component information error to open fixed compo-

nent information.

Fixed component information error

Failed to read fixed component information.

Fixed component information error

Failed to write fixed component information.

Fixed component information error

Failed to write fixed component information.

Fixed component information error

Specified fixed component doesn’t exist.

Fixed component information error

“Component Name” are different between PCB data and

fixed component.

Fixed component information error

“Feeder Type” are different between PCB data and fixed

component.

You can’t multiply such a component as

•Using fixed component reference function

•Not using feeder optimization

•Tray components

(meaning)An error occurred when opening the PCB file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. In any other case, check to see how

often the problem occurs, and contact the manufacturer.

(meaning)An error occurred when opening the PCB file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. In any other case, check to see how

often the problem occurs, and contact the manufacturer.

(meaning)An error occurred when opening the PCB file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. In any other case, check to see how

often the problem occurs, and contact the manufacturer.

(meaning)Fixed components in the PCB data cannot be fixed.

(cause)The components cannot be fixed because they interfere with

another feeder which has already been fixed.

(remedy)Do not attempt to fix the components causing the interfer-

ence, or stop trying to fix the components which are currently dis-

played.

(meaning)An error occurred when opening the fixed component in-

formation file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. If there is a problem with the disk,

check to see how often the problem occurs, and contact the manu-

facturer.

(meaning)An error occurred when opening the fixed component in-

formation file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. If there is a problem with the disk,

check to see how often the problem occurs, and contact the manu-

facturer.

(meaning)An error occurred when opening the fixed component in-

formation file.

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. If there is a problem with the disk,

check to see how often the problem occurs, and contact the manu-

facturer.

(meaning)The specified fixed component information does not ex-

ist.

(cause)There was an error in registering the fixed component refer-

ence number, or the fixed component has not yet been registered.

(remedy)Go back to the editing screen and check the reference

number for the fixed component. If the fixed component has not yet

been registered register it.

(meaning)The component name registered in the PCB data is dif-

ferent from the fixed component being referenced by that compo-

nent.

(cause)Same as above.

(remedy)Change the component name in the PCB data to match

that of the fixed component.

(meaning)The name of the feeder being used in the PCB data is

different from the fixed component feeder being referenced by that

component.

(cause)Same as above.

(remedy)Change the name of the feeder being used in the PCB

data to match that of the fixed component feeder.

(meaning)An attempt was made to input multiple components ref-

erencing fixed components on the component information screen.

(cause)Same as above.

(remedy)There cannot be more than one component referencing

any particular fixed component.

Ea -16

ERROR MESSAGES LIST

YV88Xabcabcabc

Ea00727

Ea00730

Ea00731

Ea00732

Ea00733

Ea00734

Ea00735

Ea00736

Ea00737

Ea00738

Ea00739

Failed to fix the component in fixed component.

Alternative component error

Failed to read alternative component.

Alternative component error

Loop is not perfect.

Alternative component error

Alternative component specified in the data doesn't ex-

ist.

Machine YV112

Component 3

Alternative component error

"Feeder Type" is not same as original one.

In Static Components, the component data of same name

are dealed with the alternative component. Each alter-

native components need to same the above condition.

Alternative component error

"Required Nozzle" is not same as original one.

In Static Components, the component data of same name

are dealed with the alternative component. Each alter-

native components need to same the above condition.

Alternative component error

"CountOutStop" is not same as original one.

In Static Components,the component data of same name

are dealed with the alternative component. Each alter-

native components need to same the above condition.

Alternative component error

"UpdateGroupNo" must be all positive or all 0 in loop.

In Static Components,the component data of same name

are dealed with the alternative component. Each alter-

native components need to same the above condition.

Alternative component error

Mount table is not same as original one.

Alternative component error

You can't use alternative function for tray.

Alternative component error

"Component Name" are different from original one.

(meaning)Components registered in the fixed components cannot

be fixed.

(cause)The components cannot be fixed because they interfere with

another feeder which has already been fixed.

(remedy)Edit the fixed component information and delete the com-

ponent which is causing the interference.

(meaning)An error occurred when reading the alternative compo-

nent data.

(cause)The data for the alternative component specified by the

component data does not exist, or there is a problem with the hard

disk.

(remedy)Go back to the editing screen, and if the alternative com-

ponent does not exist, register it, or change the number of the al-

ternative component.If there is a problem with the hard disk, check

to see how often it occurs, and contact the manufacturer.

(meaning)The settings for alternative components must form a loop

that goes from 1 to 2 to 3 and back to 1 again, but they do not form

this loop.

(cause)The alternative component settings go from 1 to 2 to 3 and

then stop, or form a figure 6 by going from 1 to 2 to 3 and back to 2

again.

(remedy)Go back to the editing screen and check the alternative

component numbers.

(meaning)There is no alternative component data.

(cause)The user has forgotten to register the alternative compo-

nents, or there is a registration error in the alternative component

number.

(remedy)Go back to the editing screen and register the alternative

components, or change the number of the alternative components.

(meaning)The feeder being used for alternative components is not

the same feeder that was used for the original components.

(cause)Same as above.

(remedy)The feeder being used for alternative components must

match the feeder that was used for the original components.

(meaning)The nozzle being used for alternative components is not

the same nozzle that was used for the original components.

(cause)Same as above.

(remedy)Go back to the editing screen and make the nozzle being

used for alternative components match the nozzle that was used

for the original components.

(meaning)The setting for the "count out stop" function used with

alternative components does not match that used with the original

components.

(cause)Same as above.

(remedy)The setting for the "count out stop" function used with al-

ternative components must match that used with the original com-

ponents.

(meaning)In the alternative components loop, all of the settings for

"Use" or "Don't Use" must be set to the same setting.

(cause)In the alternative components loop, some of the compo-

nents reference fixed components, while some do not.

(remedy)Go back to the editing screen and change the settings so

that they all reference fixed components, or none of them do.

(meaning)In the alternative components loop, there are components

with different mounting tables.

(cause)When the settings for the alternative components are 1 -->

2 --> 3, No. 3 is attached to Table B although Nos. 1 and 2 are

attached to Table A, or a different combination of the above.

(remedy)Go back to the editing screen and change the feeder set-

ting numbers so that all of the alternative components are assigned

to the same mounting table.

(meaning)The alternative components cannot be used as tray com-

ponents.

(cause)An attempt was made to use alternative components as

tray components.

(remedy)Go back to the editing screen and change the alternative

component number for the tray components to 0.

(meaning)The name of the alternative component does not match

the name of the original component.

(cause)Same as above.

(remedy)Go back to the editing screen and change the name of

the alternative component so it matches that of the original compo-

nent.

Ea00740

Ea00741

Ea00742

Ea00750

Ea00751

Ea00752

Ea00760

Ea00761

Ea00762

Ea00763

Ea00764

Failed to open fixed component matching work file.

Failed to read fixed component matching work file.

Failed to write fixed component matching work file.

Failed to open fixed component work file.

Failed to read fixed component work file.

Failed to write fixed component work file.

You can't multiply component so many times.

Mount data specifies too big component number.

Selected PCB is not registered in selected line.

Too much point, local and 4-point fiducial data.

Too much mark data.

(meaning)An error occurred in opening the work file for the fixed

component matching

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. If there is a problem with the disk,

check to see how often the problem occurs, and contact the manu-

facturer.

(meaning)An error occurred in opening the work file for the fixed

component matching

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. If there is a problem with the disk,

check to see how often the problem occurs, and contact the manu-

facturer.

(meaning)An error occurred in opening the work file for the fixed

component matching

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. If there is a problem with the disk,

check to see how often the problem occurs, and contact the manu-

facturer.

(meaning)An error occurred in opening the work file for the fixed

component matching

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. If there is a problem with the disk,

check to see how often the problem occurs, and contact the manu-

facturer.

(meaning)An error occurred in opening the work file for the fixed

component matching

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB data and then delete it. If there is a problem with the disk,

check to see how often the problem occurs, and contact the manu-

facturer.

(meaning)An error occurred in opening the work file for the fixed

component matching

(cause)There is no space available on the hard disk, or there is a

problem with the hard disk.

(remedy)If there is no space available, back up any unnecessary

PCB dat

a and then delete it. If there is a problem with the disk, check

to see how often the problem occurs, and contact the manufacturer.

(meaning)When component separation is done on the component

information screen, the number of component divisions exceeds

the upper limit.

(cause)An excessively large value was input for the number of com-

ponent divisions

(remedy)Reduce the number of component divisions.

(meaning)The component number specified in the mounting data

exceeds the maximum number of components that the machine

can accommodate.

(cause)The number input for the components in the mounting data

is too large.

(remedy)Go back to the editing screen and correct the component

number in the mounting data.

(remedy)Go back to the editing screen and correct the component

number in the mounting data.

(meaning)The selected PCB data has not been registered on the

selected line.

(cause)There is an error in the selection of either the line or the

PCB data, or the PCB data has not been registered.

(remedy)Correct the selection of either the line or the PCB data, or

(meaning)There are too many elements of point, local or 4-point

fiducial data.

(cause)Too many point, local or 4-point fiducials are being used.

(remedy)Reduce the number of point, local or 4-point fiducials.

(meaning)There are too many elements of mark data.

(cause)There are too many elements of mark data being used for

fiducials and bad marks.

(remedy)Reduce the mark data.