YAMAHA errer code-a - 第28页

Ea - 28 ERROR MESSAGES LIST Ea Ea02561 Ea02562 Ea02563 Ea02564 Ea02565 Ea02566 Ea02567 Ea02568 Ea02569 Ea02570 Ea02571 Ea02572 Ea02573 Ea02574 Ea02575 Ea02576 Ea02577 Ea02578 Ea02579 Ea02580 Ea02581 Ea02582 Ea02583 Ea025…

100%1 / 42
Ea -27
ERROR MESSAGES LIST
Ea
Ea02507
Ea02508
Ea02509
Ea02510
Ea02511
Ea02512
Ea02513
Ea02514
Ea02515
Ea02516
Ea02520
Ea02521
Ea02522
Ea02523
Ea02524
Ea02525
Ea02526
Ea02527
Ea02528
Ea02530
Ea02531
Ea02532
Ea02533
Ea02534
Ea02535
Ea02536
Ea02537
Ea02538
Ea02539
Ea02540
Ea02541
Ea02542
Ea02543
Ea02544
Ea02545
Ea02546
Ea02547
Ea02548
Ea02549
Ea02550
Ea02551
Ea02552
Ea02553
Ea02554
Ea02555
Ea02556
Ea02557
Ea02558
Ea02559
Ea02560
VISION BOARD INITIALIZATION ERROR
It failed in the initialization of vision sysytem. Machine
can’t be started. Please finish application soft after error
message is cleared.
SERVO BOARD INITIALIZATION ERROR
It failed in the initialization of servo sysytem. Machine can’t
be started. Please finish application soft after error mes-
sage is cleared.
I/O BOARD INITIALIZATION ERROR
It failed in the initialization of I/O sysytem. Machine can’t
be started. Please finish application soft after error mes-
sage is cleared.
MACHINE START ERROR
Machine can’t be started. Please finish application soft
after error message is cleared.
SERVO BOARD1 DATA WRITE ERROR
When reading line %d in HEX file, failed to write servo
board1 data. Machine can’t be started. Please finish ap-
plication soft after error message is cleared.
SERVO BOARD2 DATA WRITE ERROR
When reading line %d in HEX file, failed to write servo
board2 data. Machine can’t be started. Please finish ap-
plication soft after error message is cleared.
SERVO BOARD3 DATA WRITE ERROR
When reading line %d in HEX file, failed to write servo
board3 data. Machine can’t be started. Please finish ap-
plication soft after error message is cleared.
SERVO BOARD4 DATA WRITE ERROR
When reading line %d in HEX file, failed to write servo
board4 data. Machine can’t be started. Please finish ap-
plication soft after error message is cleared.
SERVO HEX DATA ERROR
When reading line %d in HEX file, failed to read servo
HEX data. Machine can’t be started. Please finish appli-
cation soft after error message is cleared.
SERVO HEX ADDRESS ERROR
When reading line %d in HEX file, Failed to read servo
HEX data. Machine can’t be started. Please finish appli-
cation soft after error message is cleared.
APPL BOARD BOOT ERROR
Failed to write command to APPL. Command-Area
couldn’t be reset. Machine can’t be started. Please finish
application soft after error message is cleared.
APPL BOARD COMMAND ERROR
Failed to write srv-command to APPL. Command-Area
couldn’t be reset. Machine can’t be started. Please finish
application soft after error message is cleared.
APPL BOARD DPRAM WRITE ERROR
Failed to write data to APPL DPRAM. Aborted to down-
load APPLBOOT,APPLMAIN,IOMAIN-PROG. Machine
can’t be started. Please finish application soft after error
message is cleared.
APPL BOARD HANDSHAKE ERROR
Failed to handshake between HOST and APPL. Aborted
to download APPLMAIN,IOMAIN-PROG. Machine can’t
be started. Please finish application soft after error mes-
sage is cleared.
APPL BOARD TRANSFER ERROR(APPL-HEX)
Failed to dowmload to APPL BOARD. Aborted to down-
load APPLBOOT-PROG. Machine can’t be started. Please
finish application soft after error message is cleared.
APPL BOARD TRANSFER ERROR(APPL-HEX)
Failed to dowmload to APPL BOARD. Aborted to down-
load APPLMAIN-PROG. Machine can’t be started. Please
finish application soft after error message is cleared.
APPL BOARD TRANSFER ERROR(IO-HEX)
Failed to dowmload to IO BOARD. Aborted to download
IOMAIN-PROG. Machine can’t be started. Please finish
application soft after error message is cleared.
APPL BOARD TRANSFER ERROR(SRV-HEX)
Failed to dowmload to SERVO BOARD. Aborted to down-
load SRVMAIN-PROG. Machine can’t be started. Please
finish application soft after error message is cleared.
APPL BOARD DOWNLOAD-STATUS ERROR
Incorrect Download-Status was found. Aborted to down-
load APPLMAIN,SRVMAIN-PROG. Machine can’t be
started. Please finish application soft after error message
is cleared.
Failed to wrte PCB log.
FILE READ ERROR
Failed to read PCB Information.
FILE READ ERROR
Failed to read Mount Data.
FILE READ ERROR
Failed to read Mark Data.
FILE READ ERROR
Failed to read Component Data.
FILE READ ERROR
Failed to read Pattern Matching Data.
FILE READ ERROR
Failed to read BGA Data.
FILE WRITE ERROR
Failed to write PCB information.
FILE WRITE ERROR
Failed to write Mount Data.
FILE WRITE ERROR
Failed to write Mark Data.
FILE WRITE ERROR
Failed to write Component Data.
FILE WRITE ERROR
Failed to write Pattern Matching Data.
FILE WRITE ERROR
Failed to write BGA Data.
FILE READ ERROR
Failed to read “OmaShift.sts”.
FILE WRITE ERROR
Failed to write “OmaShift.sts”.
FILE READ ERROR
Failed to read Machine Config.
FILE WRITE ERROR
Failed to write Machine Config.
FILE READ ERROR
Failed to read Machine Data.
FILE WRITE ERROR
Failed to write Machine Data.
FILE READ ERROR
Failed to read Nozzle Specification.
FILE WRITE ERROR
Failed to write Nozzle Specification.
FILE READ ERROR
Failed to read Head Specification.
FILE WRITE ERROR
Failed to write Head Specification.
FILE READ ERROR
Failed to read FNC Specification.
FILE WRITE ERROR
Failed to write FNC Specification.
FILE READ ERROR
Failed to read Feeder Specification.
FILE WRITE ERROR
Failed to write Feeder Specification.
FILE READ ERROR
Failed to read Feeder Plate Specification.
FILE WRITE ERROR
Failed to write Feeder Plate Specification.
FILE READ ERROR
Failed to read Special Setting.
FILE WRITE ERROR
Failed to write Special Setting.
Ea -28
ERROR MESSAGES LIST
Ea
Ea02561
Ea02562
Ea02563
Ea02564
Ea02565
Ea02566
Ea02567
Ea02568
Ea02569
Ea02570
Ea02571
Ea02572
Ea02573
Ea02574
Ea02575
Ea02576
Ea02577
Ea02578
Ea02579
Ea02580
Ea02581
Ea02582
Ea02583
Ea02584
Ea02585
Ea02586
Ea02587
Ea02588
Ea02589
Ea02590
Ea02591
Ea02592
Ea02593
Ea02594
Ea02595
Ea02596
Ea02597
Ea02600
Ea02601
Ea02602
Ea02603
Ea02604
Ea02605
Ea02800
Ea02801
Ea02802
Ea02803
Ea02804
Ea02805
Ea02806
Ea02807
Ea02808
Ea02809
Ea02810
Ea02811
Ea02812
FILE READ ERROR
Failed to read Vacuum Level for Each Nozzle.
FILE WRITE ERROR
Failed to write Vacuum Level for Each Nozzle.
FILE READ ERROR
Failed to read Feeder Timer Specification.
FILE WRITE ERROR
Failed to write Feeder Timer Specification.
I/O LIST FILE READ ERROR
Failed to read I/O List Data.
I/O LIST FILE WRITE ERROR
Failed to write I/O List Data.
TYPE FILE READ ERROR
Failed to read Motor Type File.
TYPE FILE WRITE ERROR
Failed to write Motor Type File.
SPEC FILE READ ERROR
Failed to read Specification File.
SPEC FILE WRITE ERROR
Failed to write Specification File.
DISPENCE NOZZLE SHAPE FILE READ ERROR
Failed to read Dispense Nozzle Shape.
DISPENCE NOZZLE SHAPE FILE WRITE ERROR
Failed to write Dispense Nozzle Shape.
DISPENCE SEQUENCE FILE READ ERROR
Failed to read Dispense Sequence.
DISPENCE SEQUENCE FILE WRITE ERROR
Failed to write Dispense Sequence.
DISPENCE NOZZLE TYPE FILE READ ERROR
Failed to read Dispense Nozzle Type.
DISPENCE NOZZLE TYPE FILE WRITE ERROR
Failed to write Dispense Nozzle Type.
SPEED SETTING FILE READ ERROR
Failed to read Speed Setting File.
SPEED SETTING FILE WRITE ERROR
Failed to write Speed Setting File.
BRAND SETTING FILE READ ERROR
Failed to read Brand Setting File.
BRAND SETTING FILE WRITE ERROR
Failed to write Brand Setting File.
COORD-MACS DATA FILE READ ERROR
Failed to read Coord-Macs Data File.
COORD-MACS DATA FILE WRITE ERROR
Failed to write Coord-Macs Data File.
PARAMETER FILE READ ERROR
Failed to read Accuracy Parameter for Each Nozzle.
PARAMETER FILE WRITE ERROR
Failed to write Accuracy Parameter for Each Nozzle.
PATLIGHT SPEC FILE READ ERROR
Failed to read Patlight Speification.
PATLIGHT SPEC FILE WRITE ERROR
Failed to write Patlight Speification.
VISION RESULT FILE READ ERROR
Failed to read Vision Result.
VISION RESULT FILE WRITE ERROR
Failed to write Vision Result.
FILE READ ERROR
Failed to read PCB Data.
FILE WRITE ERROR
Failed to write PCB Data.
FILE READ ERROR
Failed to read FES Fiducial Data.
FILE READ ERROR
Failed to read %s file.
FILE WRITE ERROR
Failed to write %s file.
FILE OPEN ERROR
Failed to open %s file.
FILE CLOSE ERROR
Failed to close %s file.
OPERATOR PANEL SPEC FILE READ ERROR
Failed to read Operator Panel Speification.
OPERATOR PANEL SPEC FILE WRITE ERROR
Failed to write Operator Panel Speification.
APPL HEX FILE ACCESS ERROR
Failed to access %s file.
APPL HEX FILE OPEN ERROR
Failed to open %s file.
APPL HEX FILE CLOSE ERROR
Failed to close %s file.
APPL HEX FILE FORMAT ERROR
Format-Error was found in %s file.
EAPPL HEX FILE DATA ERROR
Data-Error was found in %s file.
APPL HEX FILE CHECKSUM ERROR
Checksum-Error was found in %s file.
Failed to create Panel button detect task.
DATABASE
Set from Component-DATABASE has been completed.
From
Database No. ***
To
Component No. ***
DATABASE
Set to Component-DATABASE has been completed.
From
Component No. ***
To
Database No. ***
DATABASE
Add to Component-DATABASE has been completed.
From
Component No. ***
To
Database No. ***
DATABASE ERROR
In Component-DATABASE, data of this number is not
exist.
Database No. ***
DATABASE ERROR
In Mark-DATABASE, data of this number is not exist.
Database No. ***
DATABASE ERROR
In Pcb-data, component data of this number is not exist.
Component No. ***
DATABASE ERROR
In Pcb-data, mark data of this number is not exist.
Mark No. ***
DATABASE ERROR
The data number exceeded the limit for Component-
DATABASE. Limit is 3000 for Component-DATABASE.
DATABASE ERROR
The data number exceeded the limit for Mark-DATABASE.
Limit is 300 for Mark-DATABASE.
DATABASE
The data is deleted from Component-DATABASE.
Database No. ***
DATABASE
The data is deleted from Mark-DATABASE.
Database No. ***
Set from Mark-DATABASE has been completed.
From
Database No. ***
To
Mark No. ***
Ea -29
ERROR MESSAGES LIST
Ea
Ea02813
Ea02814
Ea02815
Ea02816
Ea02817
Ea02818
Ea02819
Ea02820
Ea02821
Ea02822
Ea02823
Ea02824
Ea02825
Ea02826
Ea02827
Ea02828
Ea02829
Ea02830
Ea02831
Ea02832
Ea02833
Ea02834
Ea02900
Ea02901
Ea02902
Ea02903
Ea02904
Ea02905
Ea02906
Ea02907
Ea02908
Ea02909
Ea03000
Ea03001
Ea03040
Ea03041
Ea03042
DATABASE
Set to Mark-DATABASE has been completed.
From
Mark No. ***
To
Database No. ***
DATABASE
Add to Mark-DATABASE has been completed.
From
Mark No. ***
To
Database No. ***
COMPONENT DATA TRANSFER ERROR
Component Data couldn’t be transfered to vision board.
TEMPLATE DATA READ ERRROR
Failed to read Template Data.
VT FILE CONVERT ERROR
Failed to convert VT file to IBMF file.
IBMF FILE CONVERT ERROR
Failed to convert IBMF file to VT file.
APPL CPU HANDSHAKE ERROR
Failed to communictae with APPL CPU.
FES FIDUCIAL MARK DATA READ ERROR
Failed to read FES Fiducial data from Mark-DATABASE.
Database No. ***
Please check Mark-DATABASE.
MULTI-MACS DATA TRANSFER ERROR
Multi-Macs Data couldn’t be transfered to vision board.
ILLEGAL IO ACCESS ERROR
A reference was done toward the illegal IO data.
PORT ID ***
***
FULL AUTO MOUNT FEEDBACK (FAMF)
Data of FAMF was initialized.
FULL AUTO MOUNT FEEDBACK (FAMF)
Result data of FAMF was totaled.
FULL AUTO MOUNT FEEDBACK (FAMF)
Feedback value was calculated from totaled result.
FULL AUTO MOUNT FEEDBACK (FAMF)
Feedback value was saved to Machine-Data..
ORIGIN IMCOMPLETE
Return to origin can not be done. Because it fails in read-
ing of the necessary data.
FAILED TO SEND IO DATA
Update Vacuum Data to IO SYSTEM is failed. Please run
again.
Parts data is not ready.
Please prepare correct parts data.
Fiducial Mark data is not ready.
Please prepare correct mark data.
Badmark Mark data is not ready.
Please prepare correct mark data.
OPERATION START ERROR
A machine adjustment program is starting. Start opera-
tion again after the machine adjustment program comple-
tion.
DATABASE
Set all component data from Component-DATABASE has
been completed.
DATABASE
Set all mark data from Mark-DATABASE has been com-
pleted.
NOZZLE CHANGE
NOZZLE CHANGE is done successfully.
NOZZLE CHANGE SETTING ERROR
This head cannot be used for NOZZLE CHANGE. Please
make sure the following items.
1. Machine Config : Is Machine Type available for NOZZLE
CHANGE ?
2. Machine Config : Is Setting of Nozzle Station is “Exist”
?3. Machine Data : Is Setting of Head Offset is “Auto
Nozzle Change” ?
4. Machine Data : Is Setting of Flying Nozzle Spec cor-
rect ?
NOZZLE CHANGE SETTING ERROR
There is no Nozzle for Anc. Please make sure the follow-
ing items.
1. Machine Data : Is Setting of Nozzle Station correct ?
NOZZLE CHANGE SETTING ERROR
There is too much Nozzles for Anc. Please make sure the
following items.
1. Machine Data : Is Setting of Nozzle Station correct ?
NOZZLE CHANGE SETTING ERROR
There is no Nozzle for Fnc. Please make sure the follow-
ing items.
1. Machine Data : Is Setting of Flying Nozzle Spec cor-
rect ?
NOZZLE CHANGE SETTING ERROR
There is too much Nozzle for Fnc. Please make sure the
following items.
1. Machine Data : Is Setting of Flying Nozzle Spec cor-
rect ?
NOZZLE CHANGE STATUS ERROR
To specify nozzle on head is impossible. Please make
sure the following items.
1. Status of Nozzle Station.
COMPONENT DATA ERROR
This component has no feeder set number. Please set
feeder set number.
DATA ERROR
Required nozzle for this component can’t be attached this
head.
Head No. ***
Nozzle No. ***
Please check [COMPONENT DATA] and [HEAD SPEC
INFO].
NOZZLE CHANGE ERROR
Failed to change nozzles.
DIP STATION ERROR
The machine could not do the dip action, because the dip
station was not ready.
Dip impossibility
An dip action can’t be done. The cause is which the fol-
lowing:
• Dip station size is unusual.
• Dip pitch, zero.
• Dip number, zero.
CONFIRMATION OF EMPTY
The component may be empty. Please confirm the status
of following component.
Mount Data ***
Component Data *** Name ***
Feeder set position **
Empty :[SPACE]
Not Empty :Others
CAUTION: Please check barcodes, then clear the INTER-
LOCK error using line control system.
CONFIRMATION OF EMPTY
The component may be empty. Please confirm the status
of following component.
Mount Data ***
Component Data *** Name ***
Feeder set position **
Empty :[SPACE]
Not Empty :ESC]