YAMAHA errer code-a - 第32页

Ea - 32 ERROR MESSAGES LIST Ea Ea05004 Ea05005 Ea05006 Ea05007 Ea05008 Ea05010 Ea0501 1 Ea05012 Ea05013 Ea05014 Ea05015 Ea05016 Ea05017 Ea05018 Ea05019 Ea05020 Ea05021 Ea05022 Ea05023 Ea05024 Ea05025 Ea05026 Ea05027 Ea05…

100%1 / 42
Ea -31
ERROR MESSAGES LIST
Ea
Ea03507
Ea03601
Ea03602
Ea03603
Ea03604
Ea03605
Ea03606
Ea03607
Ea03608
Ea03609
Ea03610
Ea03611
Ea03612
Ea03613
Ea03614
Ea03615
Ea03616
Ea03617
Ea03618
Ea03619
Ea03620
Ea03621
Ea03622
Ea03623
Ea03624
Ea03625
Ea03626
Ea03627
Ea03628
Ea03629
Ea03630
Ea03631
WAFER TRAY CHANGER ERROR
Continuous component error count reached the speci-
fied limit.
Mount data ***
Component data *** Name ***
Pallet **
PCB DATA ERROR
The “FeederType Wafer” can not be used for component
data V20 compatible mode.
Machine *
Component data *** Name ***
PCB DATA ERROR
No mark is specified for the “Mark for Comp” field of the
wafer component.
Machine *
Component data *** Name ***
PCB DATA ERROR
No mark data exists for the “Mark for Comp” of the wafer
component.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “MarkType” is not suitable for the “Mark for Comp” of
the wafer component.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “SearchArea” is larger than F.O.V. of the camara for
the “Mark for Comp” of the wafer component.
Machine *
Component data *** Name ***
PCB DATA ERROR
No mark data exists for the “Mark for Bad” of the wafer
component.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “MarkType” is not suitable for the “Mark for Bad” of
the wafer component.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “SearchArea” is larger than F.O.V. of the camara for
the “Mark for Bad” of the wafer component.
Machine *
Component data *** Name ***
PCB DATA ERROR
The relation between “InitSearchDir” and
“SwitchDirection” is illogical.
Machine *
Component data *** Name ***
PCB DATA ERROR
The relation between “InitSearchDir” and “CurSearchDir”
is illogical.
Machine *
Component data *** Name ***
PCB DATA ERROR
No Wafer-TC head carries the nozzle that can handle
this component.
Machine *
Component data *** Name ***
PCB DATA ERROR
No Wafer-TC station can handle this component.
Machine *
Component data *** Name ***
PCB DATA ERROR
Illegal pallet number for the wafer component.
Machine *
Component data *** Name ***
PCB DATA ERROR
Negative value for the “TapeThickness” is not allowed.
Machine *
Component data *** Name ***
PCB DATA ERROR
Negative value for the “WaferDia.” is not allowed.
Machine *
Component data *** Name ***
PCB DATA ERROR
Negative value for the “RingDiameter” is not allowed.
Machine *
Component data *** Name ***
PCB DATA ERROR
”WaferDia.” should be smaller than “RingDiameter”.
Machine *
Component data *** Name ***
PCB DATA ERROR
Negative value for the “CompPitch” is not allowed.
Machine *
Component data *** Name ***
PCB DATA ERROR
”Start Pos” is out of the “WaferDia.”.
Machine *
Component data *** Name ***
PCB DATA ERROR
”Current Pos” is out of the “WaferDia.”.
Machine *
Component data *** Name ***
PCB DATA ERROR
”Comp Num” is out of the allowed range.
Machine *
Component data *** Name ***
PCB DATA ERROR
”Start Count” is out of the allowed range.
Machine *
Component data *** Name ***
PCB DATA ERROR
”Current Count” is out of the allowed range.
Machine *
Component data *** Name ***
PCB DATA ERROR
The relation between “Start Pos” and “Start Count” is il-
logical.
At least one edge will be out of the “WaferDia.”.
Machine *
Component data *** Name ***
PCB DATA ERROR
The relation between “Current Pos” and “Current Count”
is illogical. At least one edge will be out of the “WaferDia.”.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “WaferDia.” is out of the LXY moving area.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “EjectHeight” is out of the LU moving area.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “PickHeight” is out of the LP moving area.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “EjectDownTiming” is out of the LP moving area.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “Wafer Pick Height” is too deep.
Machine *
Component data *** Name ***
PCB DATA ERROR
The “Wafer Place Height” is too deep.
Machine *
Component data *** Name ***
Ea -32
ERROR MESSAGES LIST
Ea
Ea05004
Ea05005
Ea05006
Ea05007
Ea05008
Ea05010
Ea05011
Ea05012
Ea05013
Ea05014
Ea05015
Ea05016
Ea05017
Ea05018
Ea05019
Ea05020
Ea05021
Ea05022
Ea05023
Ea05024
Ea05025
Ea05026
Ea05027
Ea05028
Ea05029
Ea05030
Ea03632
Ea03651
Ea03652
Ea03653
Ea03654
Ea03655
Ea03656
Ea03657
Ea03658
Ea03659
Ea03660
Ea03661
Ea03662
Ea03663
Ea03664
Ea03665
Ea03666
Ea03667
Ea05000
Ea05001
Ea05002
Ea05003
PCB DATA ERROR
The “Pick Height” is too deep for Flip component.
Machine *
Component data *** Name ***
INTERLOCK ERROR
Wafer LXY axes can not move because the hook unit is
down. Check the up-down sensor for the hook unit.
INTERLOCK ERROR
Wafer LXY axes can not move because a pallet is not on
the proper position. Check the pallet position and the pallet
sensor.
INTERLOCK ERROR
Wafer LXY axes can not move because LP axis position
is lower than safe position. Check the position of wafer
LP axis.
INTERLOCK ERROR
Wafer LXY axes can not move because LU axis position
is higher than safe position. Check the position of wafer
LU axis.
INTERLOCK ERROR
Wafer LXY axes can not move because the pallet is not
fixed. Check the fixation and the sensor of the pallet.
INTERLOCK ERROR
Wafer LXY axes can not move because the target posi-
tion interfere with wafer ring. Move down the ejector unit.
INTERLOCK ERROR
Wafer LH axis can not move because the LXY axes are
not on the proper position.
Check the position of wafer LXY axes.
INTERLOCK ERROR
Wafer LZ axis can not move because a pallet is out of the
magazine. Check the pallet position and the sensor.
INTERLOCK ERROR
Wafer LZ axis can not move because the latch is open.
Check the latch sensor.
INTERLOCK ERROR
Wafer LT axis can not perform quick action because the
LP axis position is too low. Check the position of wafer
LP axis.
INTERLOCK ERROR
Wafer LT axis can not move because the LP axis posi-
tion is too low. Check the position of wafer LP axis.
INTERLOCK ERROR
Wafer LT axis can not move because the LS axis posi-
tion is too high. Check the position of wafer LS axis.
INTERLOCK ERROR
Wafer LR axis can not perform quick action because the
LP axis position is too low. Check the position of wafer
LP axis.
INTERLOCK ERROR
Wafer LR axis can not move because the LP axis posi-
tion is too low. Check the position of wafer LP axis.
INTERLOCK ERROR
Wafer LS axis can not move because the LT axis posi-
tion is above the LS axis.
Check the position of wafer LT axis.
INTERLOCK ERROR
Wafer LU axis can not move because the LXY axes are
moving. Check the status of wafer LXY axes.
INTERLOCK ERROR
Wafer LU axis can not move because the ejector unit is
down. Check the ejector unit sensor.
SYNTAX ERROR
A grammar mistake exists in the program.
DATA ERROR
There is a mistake in the input data format.
NUMBER ERROR
There is a mistake in the input number. There is a mis-
take in the value of the expression.
BIT NUMBER ERROR
A bit number is outside the range 1 to 16
PORT NUMBER ERROR
There is a mistake in the input/output port number.
Can not use 'I' and 'O' as the port number.
TABLE NUMBER ERROR
A table number is outside the range 0 to 9.
DIGIT NUMBER ERROR
The digit of a binary numeral has exceeded 16 digits.
The decimal numeral has exceeded 7 digits. The hexa-
decimal numeral has exceeded 4 digits.
ILLEGAL AXIS NAME
There is a mistake in the axis name.
ILLEGAL ORDER
There is a mistake in bit designation to the input/output
port. Change to ascending order starting from right.
OVERFLOW
The value for the "SPEED" command/the parameter set-
ting command is outside the allowable range.
STACK OVERFLOW
A parenthesis was used 6 times or more in succession in
an expression. A stack area for checking grammar/ex-
ecution overflowed.
ILLEGAL VARIABLE
In "SEND" command, a variable other than a global vari-
able was used.
TYPE MISMATCH
Both sides of expression do not match. Numeral/variable/
expression of the type which was not allowed was used.
FOR VARIABLE ERROR
NEXT statement variable terms corresponding to FOR
statement does not match.
WEND WITHOUT WHILE
No WHILE statement corresponding to WEND statement.
WHILE WITHOUT WEND
No WEND statement corresponding to WHILE statement.
NEXT WITHOUT FOR
No FOR statement corresponding to NEXT statement.
"NEXT" command was executed without "FOR" com-
mand.
FOR WITHOUT NEXT
No NEXT statement corresponding to FOR statement.
ENDIF WITHOUT IF
No IF statement corresponding to ENDIF statement.
ELSE WITHOUT IF
No IF statement corresponding to ELSE statement.
IF WITHOUT ENDIF
No ENDIF statement corresponding to IF statement.
ELSE WITHOUT ENDIF
No ENDIF statement corresponding to ELSE statement.
END SUB WITHOUT SUB
No SUB statement corresponding to END SUB statement.
"END SUB" command was executed without "SUB" com-
mand.
SUB WITHOUT END SUB
No END SUB statement corresponding to SUB statement.
DUPLICATED VARIABLE
Two or more array variables of the same name were de-
fined
DUPLICATED IDENTIFIER
Two or more identifiers of the same name were defined.
DUPLICATED LABEL
Two or more the same labels were defined.
UNDEFINED ARRAY
Assignment/reference was done for undefined array.
UNDEFINED IDENTIFIER
An undefined identifier was used.
UNDEFINED LABEL
Reference made to undefined label.
Ea -33
ERROR MESSAGES LIST
Ea
Ea05031
Ea05032
Ea05033
Ea05034
Ea05035
Ea05036
Ea05037
Ea05038
Ea05040
Ea05041
Ea05042
Ea05043
Ea05044
Ea05045
Ea05046
Ea05080
Ea05081
Ea05082
Ea05083
Ea05084
Ea05085
Ea05086
Ea05087
Ea05088
Ea05089
Ea05090
Ea05091
Ea05092
Ea05093
Ea05094
Ea05095
Ea05096
Ea05100
Ea05101
Ea05102
Ea05103
Ea05120
Ea05121
Ea05122
Ea05123
Ea05130
Ea05131
Ea05132
Ea05133
Ea05134
Ea05135 \
Ea05136
Ea05137
Ea05138
Ea05140
Ea05141
Ea05142
Ea05150
Ea05151
Ea05152
TOO MANY DIMENSIONS
An array exceeding 3 dimensions was defined.
DIMENSION MISMATCH
The number of array dimensions does not match that de-
fined by the DIM statement.
ARGUMENT MISMATCH
The number of SUB statement arguments does not cor-
respond with the CALL statement.
ILLEGAL IDENTIFIER
A reserved word was used as an identifier.
LLEGAL COMMAND IN PROCEDURE
Execution of command is impossible within procedure
(between SUB-END SUB statements).
ILLEGAL COMMAND OUTSIDE PROCEDURE
Execution of command is impossible outside of proce-
dure (between SUB-END SUB statements).
ILLEGAL COMMAND INSIDE IF
Execution of command is impossible inside of IF state-
ment.
ILLEGAL DIRECT
Independent execution of command is impossible.
TOO MANY IDENTIFIERS
Number of identifiers exceeds 500.
CASE WITHOUT SELECT
No SELECT statement corresponding to CASE state-
ment.
END SELECT WITHOUT SELECT
No SELECT statement corresponding to END SELECT
statement
SELECT WITHOUT END SELECT
No END SELECT statement corresponding to SELECT
statement
CASE WITHOUT END SELECT
No END SELECT statement corresponding to CASE
statement.
ILLEGAL COMMAND LINE
The command statement between SELECT and CASE
statement cannot be executed.
COMMAND DOESN'T EXIST
The line is not a command statement.
ILLEGAL COMMAND
Execution of a nonsupported and nonexecutable com-
mand was attempted.
ILLEGAL FUNCTION CALL
An expression of "ON <expression> GOTO"/"ON <ex-
pression> GOSUB" command was a negative value.
DEVIDE BY 0
Division command by 0(/0) was attempted.
NO POINT
Point does not exist.
COORDINATES TYPE ERROR
Arithmetic operations of joint coordinate point data and
cartesian point data were attempted.
SUBSCRIPT OUT OF RANGE
A subscript of an array variable has exceeded the range
which was defined in DIM statement.
RETURN WITHOUT GOSUB
"RETURN" command was executed without executing
"GOSUB" command.
END SUB WITHOUT CALL
"END SUB" command was executed without executing
"CALL" command.
EXIT SUB WITHOUT CALL
"EXIT SUB" command was executed without executing
"SUB" command.
ILLEGAL COMMAND IN ERROR ROUTINE
Within an error processing routine a command which
could not be executed was attempted.
EXIT FOR WITHOUT FOR
"EXIT FOR" command was executed without executing
"FOR" command.
SUB WITHOUT CALL
"SUB" command was executed without executing
"CALL" command.
NOT EXECUTE CALL
"CALL" command was not executed.
PROGRAM TERMINATED BY HALT
Program execution was completed by "HALT" command.
PROGRAM SUSPENDED BY HOLD
Program execution was interrupted by "HOLD" command.
SOFT LIMIT OVER
Target position exceeds soft limit position.
SEARCH FOR ORIGIN is not performed yet. Select
SEARCH ORIGIN first by using the COMMAND LISTS.
NO PCB DATA
PCB data does not exist.
PCB NOT SELECLED
PCB name is not selected. Please select PCB name by
"PCBNAME" statement.
MACHINE DATA SAVE ERROR
Failed to save HDdata to file.
PCB DATA LOAD ERROR
Failed to LOAD BDdata from file.
NO ENOUGH MEMORY
Cannot execute because of memory insufficiency.
ILLEGAL PROGRAM DATA DURING RUNNING
Illegal program data during running.
ILLEGAL POINT DATA DURING RUNNING
Illegal point data during running.
ILLEGAL OBJECT CODE
An object program has been destroyed.
OBJECT PROGRAM OPEN ERROR
Failed to open object program ***.
OBJECT PROGRAM SAVE ERROR
Failed to save object program ***.
OBJECT PROGRAM LOAD ERROR
Failed to LOAD object program ***.
OBJECT PROGRAM NAME ERROR
Failed to get object program name.
OBJECT PROGRAM VERSION DISAGREEMENT
Object program SpDat[STRing_inf0] version number dis-
agrees with APL-EXE.FILE version number. Please save
the program again.
Program checking up error. A grammar mistake exsits in
the program.
ILLEGAL OBJECT CODE
An object program SpDat[STRing_inf0] has been de-
stroyed. Please save the program again.
OBJECT PROGRAM ERROR
Source program SpDat[STRing_inf0] was updated.
Please save the program again in oder to update object
program.
NO SUCH OBJECT PROGRAM
Please save the program in oder to make object program.
Now writing program. Please wait a moment....
Now reading program. Please wait a moment....
Nom proram checking up. Please wait a moment....
FILE ALREADY OPEN
File was already opened by “FOPEN” command.
FILE NOT OPEN
File was not open by “FOPEN” command.
FILE CLOSE ERROR
Failed to close the file.
TOO MANY DIMENSIONS
An array exceeding 3 dimensions was defined.