00195760-0102_UM_D3_SR605_EN - 第174页
3 Technical data for the machine User Manual SIPLACE D3 3.10 Component trolley From software version SR.605.xx 07/2008 EN Edition 174 3.10.9 Feeder module fixing Item no. 001 19623-xx Feeder module fixing, SIPLACE HF/X/D…
User Manual SIPLACE D3 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.10 Component trolley
173
3.10.8 Reel holder for the middle tape reel on 3 x 8 mm S feeder modules
Item no. 00119643-xx Adapter plate for tape reel holder
Item no. 00141204-xx Tape reel holder, 3 x 8 mm feeder module, V2
Type 3 x 8 mm S feeder modules transport components to the pick-up position on three feeder
tracks. The tape reels of the two outer tracks are positioned between the separating plates in the
tape container. The middle tape reel is arranged over the tape reels for the two outer tracks.
For the middle tape reels you will therefore also need:
– 1 adapter plate for holding the tape reel holder (item 1 in Fig. 3.10 - 7
),
– for every two feeder modules, 1 tape reel holder (item 2 in Fig. 3.10 - 7
) and
– 1 shortened idler pulley (item 3 in Fig. 3.10 - 7
) for the tape reel holder at location 1 of the
component feeder table.
The adapter plate is fixed inside the component trolley with four fillister head screws, and the tape
reel holders are inserted into the square openings in the adapter plate.
3
Fig. 3.10 - 7 Reel holder for the middle tape reel on 3x8 mm feeder modules
(1) Adapter plate
(2) Tape reel holder
(3) Idler pulley, shortened
3 Technical data for the machine User Manual SIPLACE D3
3.10 Component trolley From software version SR.605.xx 07/2008 EN Edition
174
3.10.9 Feeder module fixing
Item no. 00119623-xx Feeder module fixing, SIPLACE HF/X/D3
The feeder module fixing is an additional mechanical locking device. It prevents the feeder mod-
ules accidentally moving on the component table and thus prevents the risk of collision with the
placement head.
The feeder module fixing is fixed to the front panel of the component table using screws. The claws
fix the feeder module feet. One feeder module fixing is needed for each component trolley.
3
Fig. 3.10 - 8 Feeder module fixing
3
(1) Feeder module fixing
(2) Component table
User Manual SIPLACE D3 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.10 Component trolley
175
3.10.10 Used tape chute
3
Fig. 3.10 - 9 Used tape chute
Attach the used tape chute to the component docking unit. The waste tape that is chopped up by
the tape cutter slides onto the used tape chute and into the waste container of the component trol-
ley.