00195760-0102_UM_D3_SR605_EN - 第205页

User Manual SIPLACE D3 4 Setting up and commissioning From software version SR.605.xx 07/2008 EN Edition 4.3 Setting up the machine 205 4.3.6 Fitting the output conveyor 4.3.6.1 T ools – Allen keys, DIN 91 1, set – Phill…

100%1 / 364
4 Setting up and commissioning User Manual SIPLACE D3
4.3 Setting up the machine From software version SR.605.xx 07/2008 EN Edition
204
4.3.5 Fitting the extension kits to the machine frame
4.3.5.1 Fitting the extension kit on the PCB output side
When the machine is delivered, the extension kit on the PCB output side and the PCB output con-
veyor are dismantled. The procedure for attaching the extension kit to the PCB output side is as
follows:
– Fitting the output conveyor
see Section 4.3.6, page 205
– Fitting the extension kit on the PCB output side see Section 4.3.7, page 206
– Installing the axis unit see Section 4.3.8, page 212
– Fitting the indicator lamps see Section 4.3.14, page 232
– Integrating the machine into the line see Section 4.3.17, page 240
– Making final adjustments to the machine see Section 4.3.18, page 243
4.3.5.2 Fitting the extension kit on the PCB input side
If the extension kit on the PCB input side was also removed for ease of transportation, you will
have to carry out the following steps before integrating the machine into the line (see Section
4.3.17
, page 240):
– Fitting the input conveyor
see Section 4.3.9, page 215
– Fitting the extension kit on the PCB input side see Section 4.3.10, page 217
– Fitting the box PC unit see Section 4.3.11, page 221
– Installing the computer unit see Section 4.3.12, page 226
– Installing the axis unit see Section 4.3.13, page 230
– Fitting the indicator lamps see Section 4.3.14, page 232
– Integrating the machine into the line see Section 4.3.17, page 240
– Making final adjustments to the machine see Section 4.3.18, page 243
User Manual SIPLACE D3 4 Setting up and commissioning
From software version SR.605.xx 07/2008 EN Edition 4.3 Setting up the machine
205
4.3.6 Fitting the output conveyor
4.3.6.1 Tools
– Allen keys, DIN 911, set
– Phillips screwdriver, size 1
4.3.6.2 Assembly
4
Fig. 4.3 - 7 Output conveyor - dual conveyor
(1) Rail, output conveyor
(2) Rail, processing conveyor 2
(3) Cable cover 20 x 200
(4) Countersunk screw, ISO 7046, M3x6, 2x per cable cover
(5) Cable cover 20 x 310
(6) Fillister head screw DIN 912, M3x5, 1x per cable cover
(7) Fillister head screw DIN 912, M6x16, and washer, 4x per rail
(8) Guide for hexagonal shaft
(9) Hexagonal shaft (single conveyor: one, dual conveyor: two)
(10) Drive unit
4 Setting up and commissioning User Manual SIPLACE D3
4.3 Setting up the machine From software version SR.605.xx 07/2008 EN Edition
206
→ Remove the cable covers (items 3 and 5 in Fig. 4.3 - 7, page 205) from the rails (item 1 in Fig.
4.3 - 7
, page 205) of the output conveyor.
→ Carefully place the rail (item 1 in Fig. 4.3 - 7
, page 205) against the rail on the processing
conveyor (item 2 in Fig. 4.3 - 7
, page 205).
CAUTION 4
Be careful not to cut through any of the light barrier or drive motor cables.
→ Fix each rail using 4 fillister head screws M6x16 and the associated washers (item 7 in Fig.
4.3 - 7
, page 205).
→ Connect the power cable to the light barriers and drive motors.
→ Fix the cable covers in place (item 3 and 5 in Fig. 4.3 - 7
, page 205).
→ Introduce the hexagonal shaft (item 9 in Fig. 4.3 - 7
, page 205) into the drive unit (item 10 in
Fig. 4.3 - 7
, page 205).
→ Make sure that the hexagonal shaft guide (item 8 in Fig. 4.3 - 7
, page 205) always points to-
wards the conveyor side wall to which the drive unit (item 10 in Fig. 4.3 - 7
, page 205) is fixed.
4.3.7 Fitting the extension kit on the PCB output side
4.3.7.1 Tools
– Allen keys, DIN 911, set
– Machine key