00195760-0102_UM_D3_SR605_EN - 第291页
User Manual SIPLACE D3 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer 291 6.1.2.3 Position of the nozzle changers for the C&P6 head 1 or 2 nozzle changers may be installed …
6 Station extensions User Manual SIPLACE D3
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
290
6.1.2.2 Technical data
6
Nozzle changer for the 6-segment Collect&Place head
Dimensions (length x width x height) 448 x 122.5 x 97.7 mm³
Number of nozzle holders 6
Nozzle types 8xx, 9xx
Nozzle changeover time approx. 2s per nozzle
Compressed air connection 0.48 MPa (4.8 bar)
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
291
6.1.2.3 Position of the nozzle changers for the C&P6 head
1 or 2 nozzle changers may be installed at locations 1, 3 and 4 for the 6-segment Collect&Place
head (items 1 and 2 in Fig. 6.1 - 8
). This gives a total capacity of 7 nozzle changers with 42 mag-
azines and a total of 252 nozzle holders.
6
Fig. 6.1 - 8 Position of the nozzle changers for the C&P6 head
(1) "Row 1" nozzle changer
(2) "Row 2" nozzle changer
(3) Reject bin for components
(4) Take-off device and reject bin for nozzles
(5) Nozzle magazine
6
6 Station extensions User Manual SIPLACE D3
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
292
6.1.2.4 Assembly
The "Row 1" nozzle changer (see Fig. 6.1 - 9) is fixed to the component trolley docking unit. There
is an additional assembly kit for the "row 2" nozzle changer. This kit consists of the take-off device
and the nozzle reject bin (see Section 6.1.2.8
, page 296).
6
Fig. 6.1 - 9 Assembly position
(1) Cover plate pointing toward the PCB conveyor
→ Align the nozzle changer so that the cover plate (item 1) points toward the PCB conveyor.
WARNING 6
Only install the associated nozzle changer for each placement head. There is a risk of head
crashes with mixed configurations.