00195760-0102_UM_D3_SR605_EN - 第296页
6 Station extensions User Manual SIPLACE D3 6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition 296 6.1.2.8 "Row 2" nozzle changer for the 6-segment Collect&Plac e head Item no. 001 19664-…
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
295
→ First place the side of the magazine with the centering hole (item 3 in Fig. 6.1 - 10) and the
slot (item 4 in Fig. 6.1 - 10
) on the base. The two knobs on the magazine must slide into the
retaining clamp (item 2 in Fig. 6.1 - 10
).
→ Push the spring hook away from the magazine.
→ Press the magazine so that it lies flat on the base, then release the spring hook. The spring
hook must latch into place.
6.1.2.7 Position detection
Every magazine of the nozzle changer has a positioning fiducial for position detection.
6
Fig. 6.1 - 11 Nozzle changer - Position detection
(1) Positioning fiducial
(2) Position of the nozzles in the magazine with respect to the positioning fiducial
6 Station extensions User Manual SIPLACE D3
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
296
6.1.2.8 "Row 2" nozzle changer for the 6-segment Collect&Place head
Item no. 00119664-xx Nozzle changer 2, HF/X/D3, 6-segment C&P head
The "row 2" nozzle changer may be installed at the following locations:
Locations 1, 3 and 4 (see Fig. 6.1 - 8
, page 291)
The retrofit package contains an assembly kit and a nozzle take-off device with reject bin, in ad-
dition to the nozzle changer.
6
Fig. 6.1 - 12 Assembly kit for the "row 2" nozzle changer
(1) Assembly kit for the "row 2" nozzle changer
(2) Nozzle take-off device for type 8xx nozzles
(3) Nozzle take-off device for type 9xx nozzles
(4) Nozzle reject bin
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
297
6.1.3 Nozzle changer for the SIPLACE TwinHead
Item no. 03005191-xx Magazine for 2 nozzles
Item no. 03001807-xx Magazine for 1 nozzle
6
Fig. 6.1 - 13 Nozzle changers for the SIPLACE TwinHead
6.1.3.1 Description
This nozzle changer can hold up to 12 nozzle magazines. There are two types of magazine avail-
able: standard magazines and magazines for special nozzles or grippers. The magazines are
seated on a common support. They are centered with two parallel pins and fixed in place with two
countersunk screws.
6.1.3.2 Technical data
6
Nozzle changers for the SIPLACE TwinHead
Dimensions (length x width x height) 448 x 68 x 49 mm³
Number of nozzle holders 16 for standard nozzles
4 for special nozzles or grippers
Nozzle types 5xx, standard
4xx with adapter
9xx with adapter
Nozzle changeover time approx. 2s per nozzle