00195760-0102_UM_D3_SR605_EN - 第305页
User Manual SIPLACE D3 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.2 Matrix tray changer 305 6.2.4.1 Dimensions 6 Fig. 6.2 - 1 Matrix tray changer , dimens ions, all dimensions in millimeter…
6 Station extensions User Manual SIPLACE D3
6.2 Matrix tray changer From software version SR.605.xx 07/2008 EN Edition
304
6.2.3.2 Electrical ratings
6
6.2.3.3 Noise emissions
6
6.2.3.4 Permitted environmental factors
6
6.2.4 Installation notes for the MTC
An MTC may be docked at locations 2 and 4 on the D3 machine in place of a component trolley.
To do this, the docking unit installed for the component trolley must be replaced with the docking
unit for the MTC. If you use the MTC at another location, the location that becomes free may be
set up with a component trolley once more.
PLEASE NOTE 6
The standard nozzle changer for the TwinHead cannot be used with a combination of TwinHead
and MTC in placement areas with two gantries. For this situation, there is a nozzle changer in the
placement area with two gantries (see Section 6.1.3.5, page 300).
Supply voltage 3 x 200 VAC ± 5 %; 50/60 Hz (Japanese version)
3 x 208 VAC ± 5%; 50/60 Hz (U.S.A. version)
3 x 400 VAC ± 5%; 50/60 Hz (European version)
Total power 1.5 kW
Rated current
2.7 A at 3 x 400 VAC
4.2 A at 3 x 208 VAC
Fuse 3 x 16 A
Rated power consumption of the
largest consumer
2 A
Max. noise emissions 74 dB (A)
Room temperature Between 15°C and 35°C
Atmospheric humidity
30 - 75%
(No higher than 45% on average to prevent any pos-
sibility of condensation on the machine)
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.2 Matrix tray changer
305
6.2.4.1 Dimensions
6
Fig. 6.2 - 1 Matrix tray changer, dimensions, all dimensions in millimeters
6 Station extensions User Manual SIPLACE D3
6.2 Matrix tray changer From software version SR.605.xx 07/2008 EN Edition
306
6.2.4.2 Controls
6
Fig. 6.2 - 2 Matrix tray changer, back view
(1) Main power switch
(2) EMERGENCY STOP button
(3) Tray supply 1 for holding up to 30 waffle-pack tray carriers (up to 60 JEDEC trays)
(4) Tray supply 2 for holding up to 40 waffle-pack tray carriers (up to 40 JEDEC trays)
(5) Point for attaching the crank for adjusting the height of matrix tray changer