00195760-0102_UM_D3_SR605_EN - 第316页

6 Station extensions User Manual SIPLACE D3 6.6 Component camera for the TwinHead, FC camera From software version SR.605.xx 07/2008 EN Edition 316 6.6.2 Safety instructions WA R N I N G 6 When the place ment head is cha…

100%1 / 364
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.6 Component camera for the TwinHead, FC camera
315
6.6 Component camera for the TwinHead, FC camera
6.6.1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)
Item no. 00119718-xx Component camera, stationary 16 x 16, digital, type 25
6
Fig. 6.6 - 1 Stationary P&P component camera (type 25) 16 x 16, digital (FC camera)
(1) Camera housing with integral camera and camera amplifier
(2) Glass plate - over the illumination and lens levels
6
6 Station extensions User Manual SIPLACE D3
6.6 Component camera for the TwinHead, FC camera From software version SR.605.xx 07/2008 EN Edition
316
6.6.2 Safety instructions
WARNING 6
When the placement head is changed from the TwinHead to the Collect&Place head, the Twin-
Head's component cameras (stationary, P&P, type 33, 55 x 45, and type 25, 16 x 16) must be
removed, otherwise the Collect&Place head will collide with the camera housings.
6.6.3 Technical data
6
6
6
6
6.6.4 Position of the stationary component cameras
The position of the stationary component cameras and the associated configurations are de-
scribed in Section 3.8.2
, from page 134.
Component dimensions 0.2 x 0.2 mm² up to 16 x 16 mm² for single component measurement
Range of components 0201 to SO, PLCC, QFP, sockets, plugs, BGA, special components,
bare dies, flip-chips, shields
Min. lead pitch 0.25 mm
Min. lead width 0.1 mm
Min. ball pitch 0.14 mm
Min. ball diameter 0.08 mm
Field of vision 19.4 x 19.4 mm²
Method of illumination Front-illumination (6 levels, programmable as required)
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.7 PCB barcode scanner
317
6.7 PCB barcode scanner
Item no. 00119682-xx 1D PCB barcode scanner
Item no. 00119679-xx 2D PCB barcode scanner
Item no. 00119684-xx PCB barcode scanner assembly kit
6.7.1 Description
The PCB barcode scanner is used to automatically record and decode barcodes on PCBs. The
PCB barcode scanner sends the read data via its serial interface to the transport controller and
then for further processing to the machine controller via the CAN bus.
Fig. 6.7 - 1 PCB barcode block diagram
6
The PCB barcode scanners are installed on the input side of the placement machine on the PCB
conveyor. Up to four devices can be retrofitted to each machine. The barcode scanners are fitted
so that the barcode labels on the topside and underside of the PCBs can be scanned on both
tracks of the dual conveyor.
There are two variants of the barcode scanner:
– 1D barcode scanner
This barcode scanner processes barcodes. 6
– 2D barcode scanner
Device number
1
Barcode
scanner
top
Distribution
board
Transport
controller,
right
Barcode
scanner
bottom
2
3
Barcode
scanner
top
Distribution
board
Transport
controller,
left
Barcode
scanner
bottom
4
Machine
controller
Control
computer
SIPLACE Pro
computer
LANCAN busV-24V-24