00195760-0102_UM_D3_SR605_EN - 第329页
User Manual SIPLACE D3 6 Station extensions From software version SR.605.xx 07/2008 EN Edition 6.13 Feeder module cover flap 329 6.13 Feeder module cover flap Item no. 001 19610-xx Feeder module cover flap , HF/X/D3, for…
6 Station extensions User Manual SIPLACE D3
6.12 Magnetic pin support From software version SR.605.xx 07/2008 EN Edition
328
6.12 Magnetic pin support
Item no. 00119680-xx Magnetic pin support HS/HF/X/D series
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting magnetic pin supports on the
lifting table.
6
Fig. 6.12 - 1 Magnetic pin support
User Manual SIPLACE D3 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.13 Feeder module cover flap
329
6.13 Feeder module cover flap
Item no. 00119610-xx Feeder module cover flap, HF/X/D3, for locations 2/4
Item no. 00119633-xx Feeder module cover flap, HF/X/D3, for locations 1/3
The feeder module cover flap is installed over the component feeder area. It is designed to prevent
a head crash with an upright feeder module retainer that has not been engaged correctly. The
feeder module cover flap can also prevent the front panel of feeder modules entering the place-
ment head traveling range due to incorrect operation.
6
Fig. 6.13 - 1 Feeder module cover flap for locations 1 and 3
(1) Feeder module cover flap
(2) Mechanical lock
(3) Switch in the EMERGENCY STOP circuit
The switch for the feeder module cover flap is looped into the EMERGENCY STOP circuit. The
feeder module cover flap must be locked mechanically, which causes the switch to close the open
EMERGENCY STOP circuit.
6 Station extensions User Manual SIPLACE D3
6.14 Component sensor for the C&P12 head From software version SR.605.xx 07/2008 EN Edition
330
6.14 Component sensor for the C&P12 head
Item no. 00118021-xx Component sensor for the 12-segment C&P head
6
Fig. 6.14 - 1 12-segment Collect&Place head with component sensor
(1) 12-segment Collect&Place head
(2) Component sensor