00195760-0102_UM_D3_SR605_EN - 第66页
2 Operational safety User Manual SIPLACE D3 2.5 Safety instructions for operating the machine From software version SR.605.xx 07/2008 EN Edition 66 2.5.7 Note on the ESD saf ety of the machines Only use noz zles that are…
User Manual SIPLACE D3 2 Operational safety
From software version SR.605.xx 07/2008 EN Edition 2.5 Safety instructions for operating the machine
65
2.5.6 Safety instructions for docking the component trolley in or out
WARNING
To prevent accidents (risk of crushing), the component trolley may only be docked in or out by
one person.
2
Fig. 2.5 - 5 Safety instructions for docking the component trolley in or out
(1) Buttons on the input and output sides
2
2
The safety concept for the component trolley change requires the operator to press a button (item
1) on the input or output side of the machine in order to dock the component trolley in or out. This
ensures that the operator is always standing to the side of the machine. In addition, the component
trolley can only be docked in if the protective covers are closed.
Docking the component trolley in or out is described in Section 5.10
, page 277. Follow the instruc-
tions exactly as described in this section.
2 Operational safety User Manual SIPLACE D3
2.5 Safety instructions for operating the machine From software version SR.605.xx 07/2008 EN Edition
66
2.5.7 Note on the ESD safety of the machines
Only use nozzles that are identified as conductive. This is the only way to meet the requirements
for the ESD safety of the machine.
2.5.8 Safety instructions for emptying the waste tape container
The waste tape container must be pulled out of the component trolley for emptying. There is a risk
of catching your thumbs as you do so. Please observe the safety instructions given in Section
5.4.2
, page 265 to prevent this from happening.
2.5.9 Safety instructions for correct use of the reject bin
Observe the following instructions to avoid risk of collision between the placement head and com-
ponent or the nozzle reject bin:
→ Make sure, that the reject bin is seated correctly in its mount.
→ Check that the reject bin does not project over the mount.
PLEASE NOTE 2
For every reject bin, a sensor (see Section 6.4
, page 314) can be retrofitted which signalizes the
correct position of the reject bin.
User Manual SIPLACE D3 2 Operational safety
From software version SR.605.xx 07/2008 EN Edition 2.6 Safety equipment
67
2.6 Safety equipment
2.6.1 Protective covers
2
Fig. 2.6 - 1 Protective covers
(1) Protective cover, short
(2) Protective cover, long
(3) Cover flap and hand guard on the input belt
(4) Cover flap and hand guard on the output belt
2
The traveling range of the gantries has two protective covers that can be swung upwards (items
1 and 2). There are side screens to prevent access to the inside of the machine from the side. The