Productivity Lift - 第104页

12 Reins talla tion User Manual - Productivity Lift 12.2 Dismantling Edition 02/2004 96 12.2 Dismantling Pack and transpor t the unit after disconnecting, power cords, interface c ables and c ompressed a ir lines. Please…

100%1 / 110
User Manual - Productivity Lift 12 Reinstallation
Edition 02/2004 12.1 Reinstallation
95
12 Reinstallation
This chapter explains how to reinstall the device. A qualified person or employee (service engi-
neer) may only do this.
N. B.
For reinstallation, dismantling or disposal the Productivity Lift has to be prepared. For installation
please refer to Installation instruction (Article No.: 00191 967-02).
12.1 Reinstallation
If the Productivity Lift needs to be removed or moved within a production line, please follow
the instructions below.
1. Position the Top Conveyor in its lowest position using the manual mode and install transport
locks (see chapter 2.5 “Fitting the transport locks”).
2. Position Shuttle Conveyor in its lower position and tighten Mount shaft clamp to secure Shuttle
Conveyor.
3. Press the button marked "Stop" on the system control panel.
4. Set the main switch to the "0" position.
5. Disconnect the power supply at the mains cable and store it away as described in the Produc-
tivity Lift installation instructions (chapter „Storing the mains cable“).
6. Disconnect any pneumatic energy supply by removing the feed hose. Pack it sensibly into the
system.
7. Remove any transport goods and magazines intended for this purpose from the device.
8. Remove the keys for the key switch located in the control cabinet to bridge the safety switches
of covers and doors.
9. Close and lock all doors and covers.
12 Reinstallation User Manual - Productivity Lift
12.2 Dismantling Edition 02/2004
96
12.2 Dismantling
Pack and transport the unit after disconnecting, power cords, interface cables and compressed air
lines. Please follow the relevant Safety and Transport regulations during this process.
12.3 Disposal
Only "operators" have responsibility for disposal. They must ensure that the system and its oper-
ating supplies are disposed of correctly.
The construction of the system only involved materials that can be easily recycled or are not harm-
ful when destroyed. Dangerous substances are not necessary for either the construction or oper-
ation of the device.
The relevant national legal provisions must be complied with when disposing of the different de-
vice parts.
12.3.1 Disposing the device
Dispose of the device by taking it apart, sorting the parts separately according to material, and
disposing of them accordingly.
The device consists of the following materials:
Frame : steel
Panelling : steel and plastic
Mechanical components : aluminium
Controller : plastics, non-ferrous metals and electronic components
User Manual - Productivity Lift Soko 00166631-01 / 12031477 Index
Software version V 43.140 Edition April 2006
97
13 Index
A
Acoustic warning signal . . . . . . . . . . . . . . . . . . .15
Address width 1 . . . . . . . . . . . . . . . . . . . . . . . . .79
Address width 1 / Address width 2 . . . . . . . . . . .78
Address width 2 . . . . . . . . . . . . . . . . . . . . . . . . .79
ALT protection . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Assembling and installing . . . . . . . . . . . . . . . . . .41
Automatic tracking . . . . . . . . . . . . . . . . . . . . . . .85
C
CAN-Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Check PCB status . . . . . . . . . . . . . . . . . . . . . . . .52
Check width . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Cleaning the warning stickers . . . . . . . . . . . . . . .15
Cluster module . . . . . . . . . . . . . . . . . . . . . . . . . .67
Code number . . . . . . . . . . . . . . . . . . . . . . . . . . .51
code-number . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
compressed air supply . . . . . . . . . . . . . . . . . . . .37
Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Cover open . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Cross module . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Cutting off the compressed air supply . . . . . . . . .37
D
DANGER OF CRUSHING . . . . . . . . . . . . . . . . .25
DANGER OF LIFE! . . . . . . . . . . . . . . . . . . . . . . .25
Danger sign W 217 . . . . . . . . . . . . . . . . . . . . . . .25
Danger signs . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Danger Symbols . . . . . . . . . . . . . . . . . . . . . . . . . .3
Danger symbols . . . . . . . . . . . . . . . . . . . . . . . . .15
danger symbols, lift unit . . . . . . . . . . . . . . . . . . .16
Description of the Product . . . . . . . . . . . . . . . . . .45
Designated use of the device . . . . . . . . . . . . . . .45
Dismantling . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
E
Electrical connection . . . . . . . . . . . . . . . . . . . . . .88
Emergency stop . . . . . . . . . . . . . . . . . . . . . 30, 93
Emergency-stop . . . . . . . . . . . . . . . . . . . . . . . . 31
Err. width inlet . . . . . . . . . . . . . . . . . . . . . . . . . . 93
ESD earth bonding point . . . . . . . . . . . . . . . . . . 29
ESD regulations . . . . . . . . . . . . . . . . . . . . . . . . 38
Example settings - Emergency service mode . . 71
Example settings - Normally function . . . . . . . . 70
Example settings for a cluster with three Siplace of
the same kind
. . . . . . . . . . . . . . . . . . . . . . . 70
F
Fault belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Fault information . . . . . . . . . . . . . . . . . . . . . . . . 93
Fault lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Fault Shuttle . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
H
Hybrid light barriers . . . . . . . . . . . . . . . . . . . . . . 85
I
Identity number . . . . . . . . . . . . . . . . . . . . . . . . . 66
Input identity number . . . . . . . . . . . . . . . . . . . . . 63
Input module . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Installation and operating instructions . . . . . . . . 41
Installation of emergency conveyor . . . . . . . . . . 42
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Interface 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Interface 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Interlock bridged . . . . . . . . . . . . . . . . . . . . . . . . 93
K
key switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
L
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Lift 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lift 1 not up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Lift 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lift 2 not down . . . . . . . . . . . . . . . . . . . . . . . . . . 93
List of figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v