Productivity Lift - 第15页

User Manual - Productivity Lift 2 Operating safety Edition 02/2004 2.1 Safety instructions 7 2.1.4 Prescribed use DANGER Any use of the product in non-accor dance with t he re gulations is prohibited ( see section 2.1.5 …

2 Operating safety User Manual - Productivity Lift

2.1 Safety instructions Edition 02/2004

NOTE

Limitation of operator tasks:

1. The user is only allowed to take out PCBs from the operator side of the lift interior when it can

easily be reached with his arm. If the user must bend his upper body to reach the PCB, then

he/she needs to ask for advice from a qualified person.

2. If it is necessary to remove the cover of the SPLC to remove a PCB, the operator must be as-

sisted by a qualified person. Although the task can be performed without a tool, it is a significant

action within the production line.

3. The qualified person must fit transport locks and security features according to the definition

of their role.

NOTE

The user is obliged to read chapter "safety".

NOTE

The users also have to observe the chapters "user roles", "operation safety" and "training" in the

user manual of the placement machine.

User Manual - Productivity Lift 2 Operating safety

Edition 02/2004 2.1 Safety instructions

2.1.4 Prescribed use

DANGER

Any use of the product in non-accordance with the regulations is prohibited (see section 2.1.5

“Non-prescribed use”).

The prescribed use of the device is defined as follows:

– The Productivity Lift consists of at least 2 lift units and 2 undefloor conveyors (in this manual

also referred to as SPLC- see 1.1.3 “Terminology for Productivity Lift”) and serves to increase

the throughput of SIPLACE automatic placement machines. Every lift unit has a placement ma-

chine of this type. Several lift units are arranged in series along with the corresponding SPLC,

this enables the parallel arrangement of placement machines although these are physically ar-

ranged in a row.

– The Productivity Lift may only be used for the purposes described in the catalogue and the

technical descriptions i.e. for the transport of bare PCBs and mounted PCBs according to the

PCB and component specifications. Any other use, or use beyond the scope of the description,

is defined as being in non-accordance with the regulations.

– The Productivity Lift may only be used in connection with external devices and components

approved by SIEMENS AG L&A. The Productivity LIft may also only be used with authorised

original spare parts. Any other use, or use beyond the scope of the description is defined as

being in non-accordance with the regulations.

– The Productivity Lift may only be operated under the conditions defined in this user manual for

installation, connection and operation.

– The Productivity Lift may only be connected to the operating voltage, when it properly inte-

grated into the SIPLACE-line as described in this user manual and in the installation manual.

The Productivity Lift may not be used outside of the SIPLACE-line.

– If no additional modules / machines are connected to the lift unit (to the input or output mod-

ules), so that the upper and / or lower transfer opening(s) is (are) freely accessible, then the

designated plate covers and the Eslon covers must be fitted (see installation instructions).

– If a conveyor or another line module is installed in front of the input module or after the output

module, so that the lift’s output opening(s) (transfer opening) are freely accessible, then the

hand protection plate supplied in the accessory package must be fitted (see installation instruc-

tions).

2 Operating safety User Manual - Productivity Lift

2.1 Safety instructions Edition 02/2004

– The Productivity Lift may only be put into or remain in operation when all of the warning stickers

on the Productivity Lift (consisting of lift unit and SPLC) are legible and present at the correct

position.

– Proper and safe operation of the product requires the appropriate transportation, the correct

assembly, installation and set up as well as careful operation, maintenance and service by ad-

equately qualified personnel, who are authorised for the work in question through training at

SIEMENS AG L&A.

– „Prescribed use“ of the product also requires observation of all instructions in the Productivity

Lift installation instructions and the Productivity Lift user manual. Precedence is given to the

observation of all instructions in the user manual from the corresponding SIPLACE placement

machine, since the optional line add-on, the Productivity Lift, has a signal connection as well

as a mechanical connection to the placement machines and it is therefore necessary to be fa-

miliar with and observe the interaction of the modules.

– Furthermore, it is necessary to observe the sections concerning interfaces and signal se-

quences in the user manuals of possible connecting modules (e.g. the conveyors).

– The contents of the above named Productivity Lift installation and user manual, as well as the

SIPLACE placement machine user manual and the user manuals of additional connected

modules / machines, must be fully understood and complied to. This ensures that the require-

ments for installation and the switching on of the Productivity Lift and therefore also for the

„prescribed use“ can be taken for granted.

By non-compliance with the „prescribed use“, SIEMENS AG L&A will assume no liability in the

event of any possible damages or injuries and will also not guarantee the flawless and proper

functioning of the components in the Productivity Lift or of the components of those machines ad-

jacent to the lift in the line.