Productivity Lift - 第19页
User Manual - Productivity Lift 2 Operating safety Edition 02/2004 2.1 Safety instructions 11 2.1.6 Import ant notices fo r the operating safety DANGER T urning the key switch on the Productivity Lift to the service posi…
2 Operating safety User Manual - Productivity Lift
2.1 Safety instructions Edition 02/2004
10
– opening of the service door (pivoting frames) or the operator doors by personnel not authorised
for these tasks.
– the operation of the Productivity Lifts and/or the SIPLACE placement machine when the safety
mechanisms have been removed or manipulated.
– the turning of the key switch to the service position by a non-authorised person. This consti-
tutes a manipulation of the safety mechanism which is comparable to the deactivation of the
acoustic warning signal.
– non-observance of the instructions in the Productivity Lift user manual or non-observance of
the instructions in the maintenance, service and installation manual of the Productivity Lift for
any continuing tasks.
– non-observance of the instructions in the operating manual of the corresponding placement
machines or other machines adjacent to the lift and therefore operating the Productivity Lift
without knowledge of the interaction of the individual modules within the line.
User Manual - Productivity Lift 2 Operating safety
Edition 02/2004 2.1 Safety instructions
11
2.1.6 Important notices for the operating safety
DANGER
Turning the key switch on the Productivity Lift to the service position bypasses the emergency stop
circuit. When the key switch is turned, all the axles can be activated with the operating panel and
will travel with full force even if the safety doors and covers are closed.
As a result very special attention must be paid here, since this is in stark contrast to the situation
when the key switch is turned on the SIPLACE placement machines. When the key switch is
turned in the SIPLACE placement machines and the safety covers are open, then either no dan-
gerous movements / functions are possible or the axles which could be dangerous can only move
very slowly.
When the operator doors are open or the service door is open, the width adjustment of the lift’s
top conveyor can be activated even if the key switch is not turned.
If the key-switch is in the service position, the width adjustment can be activated even if the upper
lift cover is open or the inlet/outlet covers of the SIPLACE placement machines are open.
To maintain the operating safety, the following points MUST be observed.
2.1.6.1 Superordinate safety regulations
DANGER
Despite all of the safety precautions provided by SIEMENS AG L&A, it is possible that improper
operation of the Productivity Lift, or improper procedures during maintenance, set up or installa-
tion, can lead from severe injuries to death (e.g through the Z-axle) and/or considerable material
damage!
¯ Observe the safety instructions in the manual.
¯ In addition it is necessary to comply to the special safety regulations specific to your country!
¯ Make no changes to the machine without prior written consent from SIEMENS AG L&A.
¯ The mains cable and the compressed air supply must be labelled so that they can be clearly
allocated to the individual modules of the assembly/ production line.
2 Operating safety User Manual - Productivity Lift
2.1 Safety instructions Edition 02/2004
12
¯ All cables (Mains and interface cable) and compressed air supply connected to the Productivity
Lift must be laid and fastened so that nobody can trip over them.
¯ Immediately replace any warning and danger stickers which have been positioned wrongly or
cannot easily be read. Clean the stickers as indicated in these instructions.
¯ Covers on the Productivity Lift, which can only be opened or removed with the help of tools or
service door key, may only be removed by personnel authorised for this task.
¯ The service door key, the keys for the key switch and the code numbers may only be accessi-
ble to personnel qualified and authorised for these tasks.
¯ It is strictly prohibited to change or to bypass safety precautions (including sensor elements,
such as safety limit-switches and light barriers).
¯ After any intervention with the machine (repair, maintenance etc.) a service technician or a
qualified person must first carry out a test run on the machine.
¯ If intervention is necessary for which your company has no adequately trained or authorised
personnel, then you must commission a service technician from SIEMENS AG L&A!
SIEMENS AG L&A will not accept claims of any kind, for damages or consequential losses
which arise through intervening with the machine in an improper manner!
¯ If potential danger is recognised during operation of the Productivity Lift, including its interac-
tion with the SIPLACE placement machine or other adjacent connecting modules, then the ma-
chine operator is obliged to immediately make a written notification to SIEMENS AG L&A.
SIEMENS AG L&A can consequently take the necessary precautions to reduce the potential
danger.
2.1.6.2 For safety of persons and operating personnel
¯ The machine operator may only carry out those tasks for which he/she is trained and which he/
she fully masters.
¯ The defined tasks for the individual user roles in normal and special mode must be observed.
¯ Never open the safety doors or covers of the Productivity Lifts, the SIPLACE placement ma-
chine or other adjacent modules, if you are not fully familiar with the operation and the function
of these machines!
¯ The safety doors and covers of the Productivity Lifts and the SIPLACE placement machine
may only be opened when you are instructed for the current task to do so in the user manual,
in an additional manual, on the monitor of the unit’s PC or when the machines are switched off,
the mains cable is disconnected and properly secured.
¯ For your safety, wear work clothes which comply with the guidelines of the „Berufsgenossen-
schaft“ (professional/trade association having liability for industrial safety and insurance),
meaning no clothes with wide sleeves etc.