Productivity Lift - 第22页
2 Operating safety User Manual - Productivity Lift 2.1 Safety instructions Edition 02/2004 14 2.1.7 Ecological disposal of materials or machine components Only materials, substance s and part s which can be easily separa…
User Manual - Productivity Lift 2 Operating safety
Edition 02/2004 2.1 Safety instructions
13
¯ Reduce the risk of danger by not wearing bracelets. ties or chains at your workplace.
¯ Persons with long hair must wear a hair protection cover.
DANGER
The Productivity Lift is powered by electricity. When operating electric appliances, there are al-
ways parts which are live and therefore dangerous!
Many components of the service door in the interior of the Productivity Lift, are still live with mains
voltage even when the main switch is turned off. All of these positions are labelled correspond-
ingly.
Before all tasks are carried out which do not belong to the operation of the unit, such as Service
and maintenance, the lift unit must be switched off at the main switch and the corresponding mains
cable must be disconnected from the mains supply.
Before all service and maintenance work is carried out on the Productivity Lift, the main switch
must be correspondingly labelled and secured with a personal padlock so that the machine cannot
be unintentionally switched back on! The mains cables must be secured so that the machine may
not be connected unintentionally! The compressed air must be switched off at the filter regulator
and must be correspondingly labelled to prevent it being switched back on unintentionally. There-
after, the necessary tasks may be carefully carried out.
When working on electrical components, comply to the special safety instructions in the corre-
sponding manual.
After the mains cable has been disconnected from the mains supply, the mains cable must still
lead down and out through the cable guide in the service door. In addition, the mains cable may
never be placed into the interior of the machine. If this is not obeyed, there is the danger that the
cable will be jammed and damaged when the service door is closed, which in turn can lead to dan-
ger for persons!
2 Operating safety User Manual - Productivity Lift
2.1 Safety instructions Edition 02/2004
14
2.1.7 Ecological disposal of materials or machine components
Only materials, substances and parts which can be easily separated and ecologically disposed of
have been used in the Productivity Lift. No substances which are harmful to the environment are
necessary for installation, dismantling or operation of the Productivity Lift.
NOTE:
The operating company of the unit is solely responsible for the professional and ecological dis-
posal of the unit. You must comply to the national laws and regulations for waste disposal and
environmental protection.
User Manual - Productivity Lift 2 Operating safety
Edition 02/2004 2.2 Warning signals and warning and danger symbols on the Productivity Lift
15
2.2 Warning signals and warning and danger symbols
on the Productivity Lift
2.2.1 Acoustic warning signal
The acoustic warning signal will sound if the lift axles are activated with the operating panel and
the service door is open or the key switch is in the service position.
WARNING
When the acoustic signal is sounded, all persons must immediately go completely out of the lift
area.
The lift axles and the axles from the SPLC will subsequently move WITHOUT further warning.
Disregard of the acoustic signal can leads to severe injuries through crushing or to death.
Switching off or manipulation of the acoustic signal is forbidden and as is the case, as with all other
safety mechanisms, constitutes a breach of the safety regulations.
2.2.2 Cleaning the warning stickers
WARNING
Do not clean the warning stickers with caustic cleaning agents or solvents. Always replace miss-
ing, damaged or illegible warning stickers.
Be careful that all warning stickers are properly positioned.