Productivity Lift - 第34页
2 Operating safety User Manual - Productivity Lift 2.2 Warning signals and warning and danger symbol s on the Productivity Lift Edition 02/2004 26 In special m ode (Key sw itch in the service posit ion) ther e is the dan…
User Manual - Productivity Lift 2 Operating safety
Edition 02/2004 2.2 Warning signals and warning and danger symbols on the Productivity Lift
25
2.2.3.4 Danger sticker W 217
Article-No.: 03025062-01
Sticker position: on the lift unit, visible after opening the operator doors.
3 x on the lift frame, top + left+ bottom.
Sticker positions: visible after opening the service doors.
1x on the right side of the lift frame
Amount per machine: 4
Category: DANGER
Fig. 2 - 14 Warning sticker W217, Art-No. 03025062-01
DANGER OF CRUSHING up to DANGER OF LIFE!
It is strictly forbidden for a person to fully bend into the lift area!.
When the lift’s Z-axle is not secured, then the only permissible action is the removal of a PCB in
normal mode and THEN only out of the lift interior and only if the operator can reach the PCB with-
out putting his arm into the lift interior above the lower arm. The operator may not reach from the
lift interior through to the SPLC.
Before all consequential intervention, which involves in any way, the entry of any body part into
the machine, the additional mechanical securing devices (clamping piece and U-bar) from the
shuttle unit and the „top conveyor“ must be fitted correctly to secure the height position. Following
this, the compressed air supply for the lift must be turned off.
This is for example for maintenance, service, transport and installation of the lift elevator unit, just
as prescribed, as for the removal of printed circuit boards in the normal operation from the SPLC.
Comply to the specifications in this user manual for the correct fitting of the of the securing devices
(clamping piece and U-bar).
2 Operating safety User Manual - Productivity Lift
2.2 Warning signals and warning and danger symbols on the Productivity Lift Edition 02/2004
26
In special mode (Key switch in the service position) there is the danger of severe crushing up to
danger of life, since all axles from the lift and the SPLC will also move with full force when the
protection is lifted.
As soon as the acoustic signal is sounded, all persons must immediately go completely out of the
lift area since the lift axles will subsequently move WITHOUT further warning.
Disregard of the above described instructions can lead to severe injuries or death.
Fig. 2 - 15 Warning sticker W217 on the lift frame, operator doors open
User Manual - Productivity Lift 2 Operating safety
Edition 02/2004 2.2 Warning signals and warning and danger symbols on the Productivity Lift
27
Fig. 2 - 16 Warning sticker W217 on the lift frame, service door opened
2.2.3.5 Warning sticker W 206
Article-No.: 03009345-01
Sticker position: on the Productivity Lift, on the casing of the electrical components on
the inside of the service doors.
– Power input, transformer
– Terminal field.
– Mains switch.
– Above the transformer- terminal block, secondary winding
Amount per machine: 4
Category: WARNING
Fig. 2 - 17 Warning sticker W206, Art-No. 03009345-01
Electrical (CAUTION)!
Parts labelled with this sticker are also live when the main switch
is switched off.
Disconnect the machine from the mains before commencing any
service work!
NAFTA-Region: Risk Of Electric Shock Or Burn.