Productivity Lift - 第96页
9 T echnical Data User Manual - Produc tivity Lift Soko 00166631-01 / 12031477 9.1 Installation and operating instructions Software version V 43.140 Edition April 2006 88 9.1 Inst allation and operating instructions For …
User Manual - Productivity Lift Soko 00166631-01 / 12031477 9 Technical Data
Software version V 43.140 Edition April 2006
87
9 Technical Data
Fig. 9 - 1 Technical Data
9 Technical Data User Manual - Productivity Lift Soko 00166631-01 / 12031477
9.1 Installation and operating instructions Software version V 43.140 Edition April 2006
88
9.1 Installation and operating instructions
For the installation and operation of the productivity lift the following details must be observed:
– Permissible surface loading of the supporting floor:0,2 t/m²
– Room temperature:15°C to 35°C
– Humidity in the area:30% to 70%, on average not higher than 45% so that condensation on the
machine can definitely be avoided.
– Max. noise production:62 dBA
– Average humidity:≥ 45%
– Surrounding influences:Exclusion of splashed water and solid particles / dust in the surround-
ing environment.
– Machine transportation:Details for transportation of the machine are found in the installation in-
structions.
9.2 Electrical and pneumatic connection
– Mains voltage:230V AC / 50Hz, 110V AC / 60 Hz
– Compressed air supply:min. 6 bar (10 l/min.), max. 10 bar
– Compressed air connection:1/2“
– Compressed air quality:see compressed air specification for the
SIPLACE placement machines.
– Specified operating pressure:5 bar
– Operating conditions:Exclusion of splashed water and solid particles / dust in the surrounding
environment.
NOTE
In contrast to the SIPLACE placement machines, the compressed air supply can be switched off
at the valve on the filter regulator for an unlimited time. This will not be damage the valve.
User Manual - Productivity Lift Soko 00166631-01 / 12031477 9 Technical Data
Software version V 43.140 Edition April 2006 9.2 Electrical and pneumatic connection
89
Machine type: Input module, Cluster module, Cross module
Length - LiftL1 540 mm
WidthB 1045 mm
High H 1200 mm with TH1 930 mm
ShuttleH1 760 mm
Weight - Lift 212 kg
Width adjustment - Shuttle transport stepper motor
Tab. 9.2 - 1 Technical Data - Input module, Cluster module, Cross module
Machine type: Output module
Length - LiftL1 540 mm
WidthB 1045 mm
High H 1200 mm with TH1 930 mm
ShuttleH1 760 mm
Weight - Lift 212 kg
Width adjustment - Shuttle transport stepper motor
Tab. 9.2 - 2 Technical Data - Output module
Underfloor conveyor for SIPLACE - short for S20 - S27 and F4 to F5 HM
Length lower beltL2 1590 mm
Total module lengthL3 2135 mm
Total unit lengthL4 2675 mm
Weight 90 kg
Width adjustment stepper motor
Tab. 9.2 - 3 Technical Data - Underfloor conveyor for SIPLACE - short