SOM-2079-001_w.pdf - 第110页

107 SOM-2079 1005-001 異常 ID 異常名、説明、要因および復帰方法 490711 Nozzle set-up The remains nozzle was detected on the head. Please conﬁrm the nozzle has not adhered to the position. Moreover, please clean the linear measure when not …

106

SOM-2079

1005-001

異常 ID 異常名、説明、要因および復帰方法

490705 Nozzle set-up

Nozzle(s) was not found in the stocker.

Check whether there is any difference in stocker arrangement data and real

arrangement.

490706 Nozzle set-up

Head nozzle existence conﬁ

rmation has error.

Please check whether there is any difference in head arrangement data and real

arrangement.

490707 Nozzle set-up

There is no free space for nozzle storing. Please conﬁrm the arrangement data.

Please conﬁ

rm the Stocker arrangement data.

490708 Nozzle set-up

There are neither a free space nor a nozzle for nozzle exchange.

Please set up an insufﬁcient nozzle in Noz stocker.

490709 Nozzle set-up

Nozzle exchange abnormal data was found.

Please conﬁrm the nozzle arrangement and the Stocker arrangement data.

49070a Nozzle set-up

Nozzle stocker position teaching failed.

Please teach the Noz stocker position again on the instruction screen.

49070b Nozzle set-up

Placement Hd / Noz data is not corresponding to the real arrangement.

Please conﬁrm the real arrangement of the head nozzle arrangement data and

the head.

49070c Nozzle set-up

Nozzle level teach error Detection.

Please execute the nozzle level teaching again on the nozzle level teach screen,

and conﬁrm there is no unexpected value.

49070d Nozzle set-up

It failed in the nozzle placement check. Conﬁrm the recognition image and select

the nozzle existence.

Please select a recognition image and choose the existence of a nozzle.

49070e Nozzle set-up

The remains nozzle was detected on the head. The nozzle cannot be set to this

position.

Please conﬁrm the nozzle has not adhered to the position. Moreover, please

clean the linear measure when not adhering.

49070f Nozzle set-up

Abnormal nozzle level detected. Possibilities are the nozzle was not fully inserted

in the head, or linear measure saw dust or scratch.

Please conﬁrm whether the nozzle has adhered to the position.

490710 Nozzle set-up

The receipt nozzle was undetectable on the head.

Please conﬁrm whether the nozzle has adhered to the position.

6.9 自動段取り

107

SOM-2079

1005-001

異常 ID 異常名、説明、要因および復帰方法

490711 Nozzle set-up

The remains nozzle was detected on the head.

Please conﬁrm the nozzle has not adhered to the position. Moreover, please

clean the linear measure when not adhering.

490712 Nozzle set-up

The linear measure error occurred in the head nozzle existence check.

Please conﬁrm the nozzle arrangement, and execute the level teaching.

490713 Nozzle set-up

The nozzle exchange sequence error occurred.

Please conﬁrm the nozzle placement.

490714 Nozzle set-up

The nozzle placement in Nozzle stocker is different from the nozzle data.

Please conﬁrm the nozzle placement.

490715 Nozzle set-up

It failed in nozzle ID detection.

Please conﬁrm the nozzle ID.

490716 Nozzle set-up

Time-out of close nozzle stocker operation.

Nozzle stocker was opened for safety. Please conﬁrm whether there is no rise to

the surface the nozzle is not in opening and shutting caught state.

490717 Nozzle set-up

A PCB was detected on the input conveyor.

Remove the P.C.B. from the input conveyor.

490718 Nozzle set-up

A PCB was detected on the positioning 1 conveyor.

Remove the P.C.B. from the positioning 1conveyor.

490719 Nozzle set-up

A PCB was detected on the central conveyor.

Remove the P.C.B. from the center conveyor.

490720 Nozzle set-up

A PCB was detected on the positioning 2 conveyor.

Remove the P.C.B. from the positioning 2 conveyor.

490721 Nozzle set-up

A PCB was detected on the output conveyor.

Remove the P.C.B. from the output conveyor.

490722 Nozzle set-up

error occurred with the nozzle existence check in the stocker before the nozzle

is stored.

-----

490723 Nozzle set-up

It failed in the nozzle storage check. Conﬁrm the recognition image and select the

nozzle existence.

-----

6.9 自動段取り

108

SOM-2079

1005-001

異常 ID 異常名、説明、要因および復帰方法

490724 Nozzle set-up

Failed in the nozzle change on the multi-functional head. Conﬁrm the data in the

Stocker of the Placement Head/ Nozzle data.

-----

490725 Nozzle set-up

Time-out of Nozzle Setup.

Please start production again.

490801 Program -change linked operation

Program-change linked operation was not ﬁnished within appointed time.

-----

496001 Support Pins/Jig detection

Support pins/Jig were detected at the stage 1 NB_W1 axis.